Home Built Z 'Full video build'

[Jason240z]

2 hours ago, Home Built by Jeff said:

It is all in the video ?

I watched the video?' i'm not sure if you said that was at the wheels or not?

[240260280]

I noticed the Dyno RPM on the screen seems off? Was the dyno working OK?

[Home Built by Jeff]

1 hour ago, Jason240z said:

I watched the video?' i'm not sure if you said that was at the wheels or not?

The engine was in the car, not on a stand so that should give you a hint ? 

[Home Built by Jeff]

6 minutes ago, 240260280 said:

I noticed the Dyno RPM on the screen seems off? Was the dyno working OK?

Are you talking about the road speed reading? The Dyno was all working well.

[Zed Head]

The dyno stuff starts at about 10 minutes.  175 MPH!

[Patcon]

1 hour ago, Zed Head said:

The dyno stuff starts at about 10 minutes.  175 MPH!

MPH or KMH?

[Marty Rogan]

Since this was done in Australia, it is probably KPH, which is about 109 MPH.

[Zed Head]

It was fuzzy.  I'm just glad there were no Newton-meter/seconds, or watts.

[Patcon]

I couldn't read any of the dyno read outs

[Home Built by Jeff]

175kph. That dyno is strange though working in HP and ft/lbs as most here in Aus use KW and NM.

[Marty Rogan]

11 minutes ago, Home Built by Jeff said:

175kph. That dyno is strange though working in HP and ft/lbs as most here in Aus use KW and NM.

I was surprised to see it show HP.  Every other dyno run I have seen in Australia showed power in KW.

[240260280]

OK.  I thought the Dyno screens was rpm but it was kph so that clarifies it.