Duffy's 1/71 Series 1 240z build

[duffymahoney]

The goal will be to add zero holes and make the whole project easily reversible.  

[Diseazd]

Really cool project. Does the ports on your intake manifold match up with the intake ports on the head? Seems to me when I was at Eiji’s shop, the Jenveys needed work on my head to match the ports on the intake. 

[wheee!]

Cool! I think the L series engine will run a lot better with individual spark control, especially if you are going to run the Haltech Elite 750.

[duffymahoney]

34 minutes ago, Diseazd said:

Really cool project. Does the ports on your intake manifold match up with the intake ports on the head? Seems to me when I was at Eiji’s shop, the Jenveys needed work on my head to match the ports on the intake. 

Jenvy’s should match right up to my SK intake. 

[duffymahoney]

First test print to look at clearances. I think it will need to be angled more. 

[duffymahoney]

I just learned that my hoke 60-2 should be enough to get the ecu all the data it needs for the crank/ cam.  Pretty neat! 

[madkaw]

How does the wheel support the cam sensor?

[duffymahoney]

2 minutes ago, madkaw said:

How does the wheel support the cam sensor?

You lost me a little. What do you mean?  

[madkaw]

The wheel is for a crank sensor ,  Im not sure how it works for a cam sensor . 

[duffymahoney]

2 minutes ago, madkaw said:

The wheel is for a crank sensor ,  Im not sure how it works for a cam sensor . 

I get a little confused on all the signals and such.  But most crank sensors are 36-1 which tells the ecu it a lot of info but not enough to know if it's intake or exhaust. The 60-2 tells the ecu exactly what stroke its on.  So that is all it needs.  But again, I am a giant newbie on all of this.  So?  

[madkaw]

You have a link to this product - I can’t find it . I thought 60-2 wheel is just another version of a 36-1 wheel. I thought two separate sensors were needed or two separate wheels to run sequential 

[duffymahoney]

https://hokeperformance.squarespace.com/l-series-crank-angle-sensor

 

https://hokeperformance.squarespace.com/store/l-series-crank-angle-sensor-kit

 

Haltech just said 60-2 is enough to run it all.  I have an email in to them as well.  Curious on it all