Excellent looking product!

Looking great!!!!

I have a very similar setup. One problem I have is the heat from the headers affects the brake lines causing other problems. I've looked for a heat shield for the brake lines but haven't found anything yet.

Mike

I love it when a plan comes together!

Fully operational below dcoe throttle body actuator for DBW ITB. Mostly hidden!

Very cool components, DBW should solve a bunch of tuning / drivability (cool start, idle speed and tip in) issues with the ITB's. Look forward to seeing the results.

Andrew

5 minutes ago, duffymahoney said:

Very cool. 😎

Here is something fun/ silly I have been thinking of and finally made. It’s a remote oil pressure distribution block made to look like the stock 240z brake prop valve. I previously had a steel T In the block, that broke off and then when I was using an easy out I cracked my stock block bung. I said never again!

3D metal printing is neat stuff. I had it tumbled to look even more cast.

I run stock gauges and my ecu needs its own signal. This location allows stock wiring to also work.

That's pretty cool! \What kind of pressure will it hold?

2 hours ago, Patcon said:

That's pretty cool! \What kind of pressure will it hold?

No idea on that one.

And a perfect spot to put it. After I did the alternator upgrade I used that spot for my headlight relays. The location ads to a "stock look".

On 4/19/2025 at 6:54 PM, w3wilkes said:

And a perfect spot to put it. After I did the alternator upgrade I used that spot for my headlight relays. The location ads to a "stock look".

Thanks! Pretty darn happy with how it all came out.