Does anybody know off the top of their head if the connector on a 240Z for the electric fuel pump jumper is an MP2TN connector found at

http://vintageconnections.com/ShoppingCart.htm

If it is I can avoid cutting it off and installing my own connector.

EDIT: Probably should have put this in Electrical

Edited September 21, 20177 yr by w3wilkes

The stock fuel pump harness at the pump by the tank is a pair of M/F 4mm bullet terminals, like SB1 and SS1. Under dash the empty connector is a 2 pin 1/4 spade MPT2 female as you guessed. Yes you can build you're own jumper or put a relay in there

Edited September 21, 20177 yr by zKars

Thanks, I think I'll put an inertia switch on the MP2T jumper.