Posted this over in Wheels, tire and brakes. Need help because I broke the bleeder off.

 

Try http://www.blackdragonauto.com. 

27 minutes ago, esmit208 said:

Try http://www.blackdragonauto.com. 

But only if you have a time machine or a Delorean.  They shut down quite some time ago.

Dennis

 

 

Just buy the later ones. Only difference is the angle of the inlet fitting that will require you to bend the hard line or make/buy a new 12" chunk of premade Copper/nickle brake line and bend it to your will using only your baby finger tips

Edited October 19, 20177 yr by zKars

2 minutes ago, zKars said:

Just buy the later ones. Only difference is the angle of the inlet fitting that will require you to bend the hard line or make/buy a new 12" chunk of premade Copper/nickle brake line and bend it to your will using only your baby finger tips

What he said

You can bend a new line in minutes

I did buy the later ones and they worked fine by just changing the bend in the line for the 90 degree inlet. I put a picture of the finished install over in the Wheels, Tires and Brakes thread referenced above.