JSM Posted November 16, 2020 Share #253 Posted November 16, 2020 I wonder how well an L6 would fit! Link to comment Share on other sites More sharing options...
five&dime Posted January 25, 2021 Author Share #254 Posted January 25, 2021 (edited) L6? You mean an L series? That was the original plan. I thought the RB would save money but I was wrong.. We routed the main OEM headlight and relay harness in the fender and put new holes to run it inside the car through the side of the kick panel after removing all the non used wires/components. This way very few wires will be inside the engine bay. The custom cluster display arrived from Mako Motorsports which fits the Haltech IC-7. Headlight motors are in along with a new throttle cable and Nismo short shifter. Then I had the car trailered up north to a shop that is making the Titanium header/exhaust. They are really moving since they have only had the car for a week! We have decided to run a JDM master cylinder to get some more clearance. They also had an aluminum driveshaft made and custom fabricated an AN line for the power steering pump. I am heading up there tomorrow to get some photos and go over the plans for the custom radiator, shrouds, PS/Coolant reservoirs and catch can. Edited January 25, 2021 by five&dime 2 Link to comment Share on other sites More sharing options...
grannyknot Posted January 25, 2021 Share #255 Posted January 25, 2021 Those pipes! Very clean. Link to comment Share on other sites More sharing options...
Patcon Posted January 26, 2021 Share #256 Posted January 26, 2021 Will you be running fender liners in the front? Link to comment Share on other sites More sharing options...
five&dime Posted January 26, 2021 Author Share #257 Posted January 26, 2021 Not sure about the liners yet. With the fenders rolled, we lost the mounting tabs along the arch. I don't plan to drive the car that much tbh. Went up to visit the car today. Looks so cool! Link to comment Share on other sites More sharing options...
five&dime Posted January 30, 2021 Author Share #258 Posted January 30, 2021 Progress and a JDM master installed to put the brake lines on the other side for better clearance. Link to comment Share on other sites More sharing options...
Diseazd Posted January 30, 2021 Share #259 Posted January 30, 2021 Like father ........like son. This car is going to blow the Z community away! Can’t wait to take the twin Safari Gold cars to an East Coast Z event. 4 Link to comment Share on other sites More sharing options...
five&dime Posted February 2, 2021 Author Share #260 Posted February 2, 2021 Indeed! I have been calling it octopus like header all along and now that's exactly what I got. 2 Link to comment Share on other sites More sharing options...
dutchzcarguy Posted February 2, 2021 Share #261 Posted February 2, 2021 12 hours ago, five&dime said: I have been calling it octopus like header all along and now that's exactly what I got. Octo = 8 So you got a sectopus... = 6 😂 1 1 Link to comment Share on other sites More sharing options...
five&dime Posted February 3, 2021 Author Share #262 Posted February 3, 2021 Header is done. 2 Link to comment Share on other sites More sharing options...
dutchzcarguy Posted February 4, 2021 Share #263 Posted February 4, 2021 Super nice BLING !! Well done!! 👍 Link to comment Share on other sites More sharing options...
five&dime Posted March 3, 2021 Author Share #264 Posted March 3, 2021 I should have the car back next week. 2 Link to comment Share on other sites More sharing options...
Jeff Berk
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now