October 30, 20177 yr comment_533716 I got mine looking nice using rubbing compound followed by aluminum polish, by hand and with a polisher on the drill, while it was on the car. Hours of hard work (no paying job at the time) and the luster was gone in a few months. Maybe if I'd done that and then the matte clear coat. My favorite cam cover, seen at JCCS, was a gritty looking metallic grey with maybe a little gold mixed in. Powder-coat the owner said. Probably too hard to keep clean for a daily driver. Link to comment https://www.classiczcars.com/forums/topic/58837-restore-ugly-valve-cover-mistake-to-media-blast/?&page=3#findComment-533716 Share on other sites More sharing options...
October 30, 20177 yr comment_533729 12 hours ago, Dlobi said: Right, early 240 right? My 260 looks like the last of the three pics diseazd posted. Except mine (still) has flat tops. That pic shows the extra tapped hole being used Learned something new today, thank you! I never knew that's what that one did. It seems they all have that hole? Here's those pictures I mentioned earlier. Before and after and apparently I used sand. That was many brain cells ago. Link to comment https://www.classiczcars.com/forums/topic/58837-restore-ugly-valve-cover-mistake-to-media-blast/?&page=3#findComment-533729 Share on other sites More sharing options...
October 31, 20177 yr comment_533812 On 10/30/2017 at 11:12 AM, siteunseen said: Learned something new today, thank you! I never knew that's what that one did. It seems they all have that hole? Here's those pictures I mentioned earlier. Before and after and apparently I used sand. That was many brain cells ago. Nice job. Wish I had more time for projects like this. Have the equipment but not enough time. Stupid paying job gets in the way most of the time. Ooops......time for me to give them their lump of coal!? Link to comment https://www.classiczcars.com/forums/topic/58837-restore-ugly-valve-cover-mistake-to-media-blast/?&page=3#findComment-533812 Share on other sites More sharing options...
October 31, 20177 yr Author comment_533813 Same problem here. Job, money, wife, kids, eating, sleeping, etc all seem to get in the way of cars, hunting, and fishing. Link to comment https://www.classiczcars.com/forums/topic/58837-restore-ugly-valve-cover-mistake-to-media-blast/?&page=3#findComment-533813 Share on other sites More sharing options...
October 31, 20177 yr comment_533836 You guys are lucky. Here's my sleep mate but I wouldn't trade him for nothing. Came into the world alone and I'll go out alone. But I do like kids, y'all's kids. Link to comment https://www.classiczcars.com/forums/topic/58837-restore-ugly-valve-cover-mistake-to-media-blast/?&page=3#findComment-533836 Share on other sites More sharing options...
October 31, 20177 yr comment_533843 7 hours ago, esmit208 said: Nice job. Wish I had more time for projects like this. Have the equipment but not enough time. Stupid paying job gets in the way most of the time. Ooops......time for me to give them their lump of coal!? I'm at the end of my free living rope, I'm about to break down and get a full time jay-oh-bee, jobby job. Anybody willing to hire a mid life hippy with a very low desire to work? Link to comment https://www.classiczcars.com/forums/topic/58837-restore-ugly-valve-cover-mistake-to-media-blast/?&page=3#findComment-533843 Share on other sites More sharing options...
October 31, 20177 yr Author comment_533845 I'll hire ya. We'll suck down loads of coffee n smoke cigarettes and spit polish my z. Pay would be half of my money. Half of nothing is nothing but hey, free coffee. Link to comment https://www.classiczcars.com/forums/topic/58837-restore-ugly-valve-cover-mistake-to-media-blast/?&page=3#findComment-533845 Share on other sites More sharing options...
October 31, 20177 yr comment_533848 You get some Kahlua for that coffee and I'll do it. Link to comment https://www.classiczcars.com/forums/topic/58837-restore-ugly-valve-cover-mistake-to-media-blast/?&page=3#findComment-533848 Share on other sites More sharing options...
November 3, 20177 yr comment_534014 No beer - no work Link to comment https://www.classiczcars.com/forums/topic/58837-restore-ugly-valve-cover-mistake-to-media-blast/?&page=3#findComment-534014 Share on other sites More sharing options...
November 3, 20177 yr Author comment_534015 Maybe I wasn't clear. I meant that I was hiring. siteunseen wanted to get hired, he didn't mention pay. I'll hire all that want to come on board, I just can't pay actual cash wages. The free coffee stands. If you want the coffee stronger our some other adult beverages you are on your own to bring them because I simply don't ever have them. Most of the "work" is looking at z car websites, poking around ebay and craigslist for z car stuff, farting, smoking, drinking, joking, etc. You might occasionally find yourself talking to my backside as I'm leaning in under the hood but the view from that angle is no worse. I better take a little nap after all this thinking about work. Link to comment https://www.classiczcars.com/forums/topic/58837-restore-ugly-valve-cover-mistake-to-media-blast/?&page=3#findComment-534015 Share on other sites More sharing options...
November 3, 20177 yr comment_534022 8 hours ago, Dlobi said: Most of the "work" is looking at z car websites, poking around ebay and craigslist for z car stuff, farting, smoking, drinking, joking, etc That's my life now, doesn't pay too well but it's a living...I guess? Link to comment https://www.classiczcars.com/forums/topic/58837-restore-ugly-valve-cover-mistake-to-media-blast/?&page=3#findComment-534022 Share on other sites More sharing options...
November 4, 20177 yr comment_534137 You're doing things right Link to comment https://www.classiczcars.com/forums/topic/58837-restore-ugly-valve-cover-mistake-to-media-blast/?&page=3#findComment-534137 Share on other sites More sharing options...
Create an account or sign in to comment