I lost the insulator/spacer that goes where the fuel pump is, how can I make one, and do I absolutely need it?

 

 

Sent from my iPhone using Classic Zcar Club mobile

You need it for proper spacing of the pump arm. It also serves as a heat insulator.

You could make one, I can tell you the exact thickness. I'd send you one, but I'm down to almost none at the moment. Let me look. Gott help a fellow Canuck....

Edited November 8, 20177 yr by zKars

You need it for proper spacing of the pump arm. It also serves as a heat insulator.
You could make one, I can tell you the exact thickness. I'd send you one, but I'm down to almost none at the moment. Let me look. Gott help a fellow Canuck....

Yes thank you!


Sent from my iPhone using Classic Zcar Club mobile

Well with the gaskets one spacer has on both sides, the total width is very close to 0.25 inches. A completely bare and new one I have is 0.222 thick.

If you want one, PM me or email to z240@shaw.ca

 

I got one of these last year when I broke mine trying to remove it. Got it from;

Richard Lowell

CHAOS Racing & Datsun Speed

5652 East University Drive

Mesa, AZ 85205

Phone: 480-892-9290

Email: 510doc@cox.net

http://desertdatsuns.com

You could try reaching out and see if he has more.

Edited November 14, 20177 yr by w3wilkes