Zpeed Posted April 30, 2003 Share #1 Posted April 30, 2003 -------------engine--------------- 240z carbs with k&N filters 6-2-1 extractors, 2.25" exhaust with a fat dump tip 280zx distributer and coil (new breaker plate from keilor nissan) 5spd is out of a 82 280zx with 20k old clutch 3.9 ratio R200 Rear diffearential from a 280zx engine is basically stock, but with a tad more compression than original, and larger pistons 40cc rather the stock 36cc i think they are, all work done by truline performance in essendon. The engine had $1800 just in parts and machine work, spent on it last year but its only done around 20k since rebuild, and treated right. I've replaced that many parts in the car that i've spent over 10g just on the car already, and thats just in the parts that i have bought, me and my dad do the work ourselves new suspension (shocks and springs) springs are 2inch lower, new front urathane bushes, new ball joints, new rear wheel bearings, new moustache bar, new front tie rods, new fuel pump alot more that i just forgot about, and i have it all just about in receipts ----------------the body---------- Rust, is hardly any for the year of the car, there is a 10cent rust hole, that is at on the body inside the drivers door, which you can't see unless you open the door, floors are good (slight surface rust no problem thou) the bad part is the passanger door, as the pillar was slightly pushed in, easily repairable, as it just needs to be pulled out and the door aligned again, as it closes harshly and i think there is rust in the door skin, but no holes, don't think its anything bad, the paint in't to bad, its blue/purple with a slight pearl thou it, and it looks like a dogy job looks fantastic in photos, and at nite, but during the day you can see the chips and all that.. but the good part also is, as i've orderd a reconditioned front and rear bumpers, and are nice and cromed, and all holes welded up etc. also i've got a rear BRE wing sitting at home, that i havn't put on yet, which will go with the car, also i've got a new front spoiler on the car, that is still in fiberglass, also have a slightly dented non vented bonnet sitting at home also, but its red... i put a new hatch on the car, as the old one has some rust, and thats got new weather stripping. also im buying some exterior peices window trim etc... ------------interoir-------------- passanger seat has a rip or 2, drivers seat is a diffearnt type, but same style, I've got seat covers so you can't see it, carpets are all good, dash has a crack, all gauges work, its got a cd player with 7x10, and 10cm pioneers but nothing worth mentioning... I've got a set of 14inch globe wheels, and a set of 16inch performance wheels, both need new tyres, I'm still undecided on which set i'll sell with the car, , and if i am i'll be keeping the 16s unless the buyer wants them, and gives me the same amount that i could sell them for I'm looking for a quick sale, with the 16s i'm looking for over 5300, but with the 16s i'm looking for over 4400, and i'll discuss with buyer about RWC etc I'm in real desperation to sell the car now, as i have found another car that i am desperate to buy. any offer will be considerd call me on 93902470, i am in sydenham or email on zpeed@hotmail.com or sborysiewicz@ozemail.com Link to comment Share on other sites More sharing options...
Zpeed Posted April 30, 2003 Author Share #2 Posted April 30, 2003 ' looks like the pictures arn't coming up, but just click on the links Link to comment Share on other sites More sharing options...
Zpeed Posted May 1, 2003 Author Share #3 Posted May 1, 2003 I've attached a ZIP file with some more detailed pictures for people to see...260z pictures.zip Link to comment Share on other sites More sharing options...
Zpeed Posted May 15, 2003 Author Share #4 Posted May 15, 2003 I havn't sold this car yet, and i need money badly to pay for new car which is on waiting for pickup. anything over 4k will be accepted Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now