I can't get the tach to come out of the metal case. I am stumped. I had it out at one time and now it will not come out. Has anyone had  this happen?  Thanks, JCB

Do you have it separeted from the dashboard? If so there should be 2 small screws that hold the metal section to the plastic section. After they are removed it will probably take a bit of a twist back and forth to get it to separate. Good luck.

esmit208,  Thanks for the reply. I did get the tack to come out. It was stuck to the case , looked like something had been spilled or leaked and stuck to the back of the tach and the case. Anyway it came out in one piece.  

Thanks again.

Anytime!