Replacement Hard Brake Lines

[87mj]

I have seen photos of a lot of restorations where the replacement hard brake lines are not precise enough to fit inside the rubber frame mount bushings in the engine bay.

Has anyone bought brake lines & fuel lines from classictube.com?  Are the bends precise enough to fit in the existing frame mounts?

Thanks

[GV Z Car]

I found they where not exact, but fit well enough to work (I did have to bend in one spot).


Sent from my iPad using Classic Zcar Club mobile

[GV Z Car]

I found they where not exact, but fit well enough to work (I did have to bend in one spot).


Sent from my iPad using Classic Zcar Club mobile

Here's a pic...

Sent from my [device_name] using http://Classic Zcar Club mobile

[87mj]

Thanks for the post.

Most of the lines look correct but the brake line going under the tunnel looks like it stopped about 3 inches too soon before it made the bend to the rear.  Then the one running to the right front tire looks way off (which naturally is the line I need the most of course).  One line looks like it is touching your steering shaft?

The fuel line and the clutch lines look exact.