We just picked up a clean 260z rolling chassis and are considering a rally/safari inspired build. The past week or so I have been doing a bunch of reading but cant find any definitive answers regarding lifted suspension setup for the chassis. Is there a proven combination that you guys are running on these? 

Try Carl Beck on this site. He built one.

Cheers, Mike

On 1/8/2018 at 4:49 PM, NoClassic said:

We just picked up a clean 260z rolling chassis and are considering a rally/safari inspired build. The past week or so I have been doing a bunch of reading but cant find any definitive answers regarding lifted suspension setup for the chassis. Is there a proven combination that you guys are running on these? 

Is the car actually going to be used in anger as a rally car, or is it more of a 'looks' thing?

If it is for serious use then I could give some recommendations, but if it's just a looks thing you could build your own setup with a few pointers.

I would prefer something that was capable of serious use but would also be interested in information regarding a budget/looks setup as well. 

Thanks! 

Edited January 9, 20187 yr by NoClassic

Start prep 1972 240Z for Trans America 2018 and P2P (Beijing to Paris for 2019)  I have been doing reading but cant find any answers about lifting suspension for about 3-6" not for look but for aggressive driving, or find skid plates setup/drawing.

Need help.

You could always try and find the factory rally springs, this guy went into immense detail about the factory Torco options with spring rates and diagrams. If the factory rally setup could survive the EAS it can handle whatever you plan to do.

http://www.jdmjunkies.ch/wordpress/2017-01-19/240z-the-ultimate-guide-to-factory-suspension-and-options/

1 hour ago, DatsunDylan said:

You could always try and find the factory rally springs, this guy went into immense detail about the factory Torco options with spring rates and diagrams. If the factory rally setup could survive the EAS it can handle whatever you plan to do.

I'm sorry but I find it hard to take the JDM Junkies thing seriously. He's got half a paper parts label,  he's reading 'TORCO LTD' on it and concluding that 'TORCO LTD' were the manufacturers of suspension components for Nissan...?

There may well be a parallel universe where somebody has found the other half of that paper label, is reading 'NISSAN MO' on it and concluding that 'NISSAN MO' were the manufacturers of suspension components for Nissan.

Edited February 20, 20187 yr by HS30-H

Reality check:

Edited February 20, 20187 yr by HS30-H
Added extra image

...sublime...!

Depending on your preference for rally vs safari, here's another car to use as inspiration:

 

Nissan sourced their parts out to other manufacturers, they didn't make everything in house. Ampco made the struts and some fuel pumps like on the Datsun 620, they put their customers part numbers on them.

3 hours ago, HS30-H said:

Reality check:

Nissan out sourced their parts, it's a Nissan factory part not made in a Nissan factory. A very common one, is AMPCO, Atsugi Motor Parts Company. They were one of the companies licensed by Nissan to make parts including L24 pistons, water and fuel pumps, and struts. If you look at your pistons they will say AMPCO or Atsugi on them, not made by Nissan, made for them. So I don't have trouble believing Torco was one of those companies.