Hope so, I hate spending money, but god do I love ordering car parts haha. I'll update you soon. Any recommendation on a specific hei module? I wish I wouldn't have accidentally broken the coil that was originally in the car. It was an old school Mallory.

Sent from my [device_name] using http://Classic Zcar Club mobile

The fancy named modules, like Accel and Pertronix, just pass more current and create more heat.  Better spark at 7000 RPM, but if you're not going to be there it's a waste.  I like the decent name brands from the parts stores.  I have a BWD from OReilly Auto right now.  Get on Rockauto and pick a Standard or BWD.  You'll save some money and get a part that will work fine with a 0.7 primary circuit coil. 

***Update***
Hooked up the new ignition components, car has great spark, and runs. I'm going to also swap out the gas for a higher octane and give an in depth analysis on how it runs with the new components. All in all, I have spark back, and I'm a happy camper :) a few more notes: I went with an 'Accel' ICM, on an ACDelco heatsink and a MSD blaster 2 ign coil. Also used 10g wire for everything.

Sent from my [device_name] using http://Classic Zcar Club mobile