Need a rear bearing spacer!!!

[Matthew Abate]

I had a local shop press my rear hubs together and had to take them back because the bearings weren’t seated correctly.

 

The idiot working on it tried to grind down the end of the spacer to make it shorter, so now the end has a gouge out of it.

 

Do I need to worry about this?

 

If so, how can I find a new one? Does anyone have one to spare?

 

Thanks in advance.

[rcb280z]

Am I wrong here for thinking the shop should be responsible for replacing this? They f'd it up, they need to replace it.

[siteunseen]

Is that the same as a "race" that comes with front bearings? Getting those down even was a pita on my garage floor.

[Travel'n Man]

I bought a great little press for that task. I would correct that spacer personally.


Sent from my iPhone using Classic Zcar Club mobile

[Zed Head]

Funny, Nissan labels them A, B, and C in the FSM, but 0, 1, and 2 by part number.  Looks like you can still get at least one size though.

http://www.carpartsmanual.com/datsun/Z-1969-1978/axle/rear-axle-drive-shaft

http://www.carpartsmanual.com/datsun/Z-1969-1978/axle/rear-axle-drive-shaft/10

https://www.nissanpartswebstore.com/p/SPACER-BEARING/51573072/43090E4100.html

[Travel'n Man]

Give your local dealer the Nissan item code and you’ll have that bad boy in just a couple days just so it is not NLA


Sent from my iPhone using Classic Zcar Club mobile

[Matthew Abate]

They are NLA. If no one here has them I’m out of luck.


Sent from my iPhone using Classic Zcar Club mobile

[Travel'n Man]

Sent from my iPhone using Classic Zcar Club mobile

[Matthew Abate]

Motorsport wants $50 each plus shipping.

http://www.thezstore.com/page/TZS/PROD/classic01a/23-5031R

Can anyone beat that?

 

 Edit: they only have the B version, so I need to find out which one I need from the shop. Actually, I need to get all my parts back and go somewhere else.

 

[rcb280z]

Try these guys. I don't see if its NLA.

Bay Ridge Nissan

532 65th st, Brooklyn, NY 11220

718-238-4776

parts@bayridgenissan.com

SPACER-BEARING (43090E4100)

YOUR PRICE     $12.02

[Travel'n Man]

I made buddies with my local stealer dealer. The charge me body shop price and I furnish them the Nissan item number.


Sent from my iPhone using Classic Zcar Club mobile

[Captain Obvious]

Woof... If it's not one thing, it's another! Is this the same shop that bent your control arm?

All else fails, I can probably make a new spacer.  I can certainly shorten one up if you find you can get the longer length but need something shorter.