On 7/8/2018 at 10:03 PM, jcb said:

do you know if the A/C compressor is ok? If it is how much do you want for it?  Also how much for the dash? Thanks JCB

I do have the compressor but do not know if it works or not...  I do know the system was not under pressure when I took it apart.

Still have the front wiring harness?? Have not noticed any posts after July 2018 ??

Webdaug1, Yes I do still have the main uncut wiring harness minus the fuel injection harness and fuel injection computer.

I am not sure what you are calling the front harness, but if it is the fuel injection harness, I sold that with the engine.

If it is not the fuel injection harness, then I still have it in good condition.

 

I also still have a LOT of other things if you are needing something else, please advise.

John 931-206-7052

 

This is the one I have left

 

h

Actually its webdawg1...LOL. So in other words from the way it  looks in your picture...this harness is from C-4, C-5, C-6, C-7 under the dash...heading into engine bay...etc...etc...but minus the fuel injection harness and fuel injection computer. Correct. (See 280Z wiring diagram to verify)

So before you were asking $200 for both...So whats your best deal + shipping for the harness you still have?? Also...was this the USA version...or for Canada...as there are some minor differences in the wiring...

Just sent a text message If you're still parting out the car. Interested in the fast idle actuator and related vacuum parts, the A/c condenser, and receiver drier.

Hi, do you have the Shim doors, upper and lower,? I believe they fit 240Z...

On the picture the arrows show the parts I'm searching.

Regards 
Mário

Hey 76Z,

I'm looking for some rear strut mount insulators. Sent you a text message too. Do you have those in good shape?

Thanks. Matthew (405area code)