Jump to content
Email-only Log-Ins Coming in December ×

IGNORED

We're bringin' back the Flat Tops!


motorman7

Recommended Posts

  • 2 years later...

On 7/21/2021 at 2:23 PM, jayhawk said:

 Small update on the Z:  Took it to the local America's Tire shop to switch the Bridgestone 175 80 14 tires I had on my slotted "mag" wheels to the Topy's I had recently restored.  They had a young fellow on staff that had a 280Z, and helped ensure nothing was bent.  (I had purchased some slotted rubber jack pad adapters to protect the frame rails which they used) Here is how they lifted it. 4 floor jacks. 

 

 

 

Link to comment
Share on other sites

I thought I'd update this thread with info about the Z of the last couple of years.  Some of this info has been mentioned in other threads, but just to complete the saga to date about this car, this post is about our adventures at ZCON 2019 in Branson.

Took it to ZCON 2019 in Branson immediately after Motorman "finished" the restoration. (is a restoration ever really finished?...)  Bought a used Nissan Armada, rented a 24' enclosed trailer, and set off for Branson from San Diego after persuading my brother to help drive, as I'd never towed anything larger than a jet ski before this. 

IMG_20190713_193217.jpg

Yoshihiko Matsuo (RIP) inspecting Motorman's work.IMG_20190717_104201.jpg

Judges judging.  Received 2nd place in Stock, after Zup's beautiful '73 Z.   Very happy for Zup, as he had unselfishly helped on this thread. IMG_4419 (1).JPG

The Branson ZCON trophies are really nice!

IMG_20190720_210331.jpg

 

  • Like 1
Link to comment
Share on other sites

In 2021, took it to some local shows.  The owner of the black Mercedes McLaren next to me was looking at my window sticker price ($4200 in 1973) and mentioned that his first service on his car was $8,000!  Yikes!   Found another '73 240Z at the show and he is now a member of ZONC (Z Owners of Northern California, of which I'm now the Membership Representative)

PXL_20210909_234238498.jpg

PXL_20210909_235824538.jpg

An attempt at artsy fartsy car photo...  Title: Sunset Over a Datsun

PXL_20210910_023255121.jpg

  • Like 4
Link to comment
Share on other sites

Posted (edited)

Took the 240Z to ZCON in Colorado Springs. Won 1st Place, Stock!  Yea, Motorman's work comes through again! 

Judging was done in a dirt lot which did not help with the cleaning.  Judges shirts on the back said "We Will Find the Dirt" - and they did.   ZUP's silver Z in in the photo next to ours.  ZUP drove it from Arkansas, and still got 2nd Place.  He was happy for me. (and Motorman, who was not there this time). 

ZCONs are a lot of fun.  Great cars and great people.

20210818_171929549_iOS.jpg

20210818_171933686_iOS.jpg

 

Trophy backed by a 13 lb (!) hunk of Colorado Fieldstone. 

PXL_20210823_221257185.jpg

Nissan unveiled the new 2023Z at ZCON a couple of days after the press revealing in New York.  I love the blue! 

PXL_20210820_180033153.jpg

Edited by jayhawk
  • Like 4
Link to comment
Share on other sites

Posted (edited)

In 2022 drove the Z to the 66th Hillsborough Concours d'Elegance, which is the oldest Continuous Concours in the World, running every year since 1956.  (Pebble Beach started a couple of years earlier, but did not hold an event in 1960 due to "scheduling conflicts")  Not as big as Pebble Beach, but still lots of incredible ancient motorcars.  (and Pebble Beach does not have a Japanese car class, not to mention incredibly expensive entrance fees)  Judging of all Concours events in N. California is done by the San Francisco chapter of the SCCA.  They do not give out judging sheets, so no one knows why anyone came in first or second etc.  It is an old boys club that rationalizes their secrecy because someone might get mad about errors they made...   This has caused one beautiful Z Owner (another Motorman restoration) to swear off all judged events.  One wonders how many other folks this has discouraged from entering SF SCCA judged events)

However, Hillsborough does have a Japanese car class, because the wife of the organizer is Japanese!  And we received 1st in Class, thanks to only 2 other cars in the class. One a modified 240Z, beautiful Z, but Concours judging rules are identical to ZCON "Stock" rules, ie. no mods.  And the other car was a '93 Acura NSX, where the owner was not present when the judges came to judge.   

Hillsborough Concours.jpg

Z at Hillsborough.jpg

This is a poster I use at events like this to show attendees why the 240Z was such an important vehicle in automotive history.

2023 THE LEGENDARY DATSUN 240Z CONCOURS INFO POSTER 18x24.jpg

PXL_20220627_224417121.jpg

 

Edited by jayhawk
  • Like 3
Link to comment
Share on other sites

Posted (edited)
1 hour ago, w3wilkes said:

@jayhawkI really like your Z "An Instant Classic" history poster! Would you mind if I used it?

  Feel free to use it.  I created it with Libra Office Write, then exported it as a PDF, and used Office Depot's online poster system to print an 18" x 24" poster.   Turnaround time was only 1 day for pickup at a local Office Depot.

I've attache the Libra Writer ODT document I created. (Microsoft Word can use this format, if that is what you use).  The file size seems smaller than I thought it should be, but that may be because the photos I used were low resolution to begin with. 

Have fun!

2023 THE LEGENDARY DATSUN 240Z CONCOURS INFO POSTER 18x24.odt

Edited by jayhawk
  • Like 1
Link to comment
Share on other sites

11 minutes ago, jayhawk said:

  Feel free to use it.  I created it with Libra Office Write, then exported it as a PDF, and used Office Depot's online poster system to print an 18" x 24" poster.   Turnaround time was only 1 day for pickup at a local Office Depot.

I've attache the Libra Writer ODT document I created. (Microsoft Word can use this format, if that is what you use).  The file size seems smaller than I thought it should be, but that may be because the photos I used were low resolution to begin with. 

Have fun!

2023 THE LEGENDARY DATSUN 240Z CONCOURS INFO POSTER 18x24.odt 179.6 kB · 3 downloads

Thank You!

Link to comment
Share on other sites

Posted (edited)

@jayhawk Some poster humor. I loaded up the .odt in Word (MS365 so it's current). Did you know that Word only supports up to 17"X22" max page size, then it doesn't have "Export Directly as a PDF", word only supports PDF's in 8.5"X11". I loaded up LibreOffice Writer and your 18"X24" (which is a standard poster size) worked just fine and the same sized Exported PDF. So if anybody else wants to look at this you really should use LibreOffice Writer (it's free), not Microsoft Word. I did make some minor changes, hope you don't mind, here's what I did...

 

2023 THE LEGENDARY DATSUN 240Z CONCOURS INFO POSTER 18x24 a.odt

Edited by w3wilkes
Minor Attachment Change
  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.