I've done some googling and can't find the answer I need. One of my front tubes is trashed 1971 240z, my buddy has a pair of 280z tubes/spindles, i understand they have a larger outside diameter, in terms of my setup and want onto run these Cosmo coilovers to start out and get my chassis a roller, can I run 280z front tubes on a 240?is there length/spring mount differences I should be aware of,should I buy em for 100 bucks or cruise the web for another set of 240 tubes. There's a set locally but buddy wants 250.bucks and they have more rust crap on em than mine did. Main problem with mine was NO WAY to get the strut out. She was welded in there with rust ,and in the efforts to remove it... I trashed the tube

 

Sent from my SM-N950W using Tapatalk

 

 

Other than tube diameter (50mm vs 55mm) they are the same enough length and spring perch wise.

If you want a 240 strut in decent shape instead, let me know.  Calgary isn't too far away. Z240@shaw.ca

Thanks zkars, I'm going to check em out tomorrow with one of mine side by side. Hopefully they will do the job for me

Sent from my SM-N950W using Tapatalk