AZDatsun Posted August 8, 2018 Share #25 Posted August 8, 2018 Update on my saga the nugeon caliper went out of stock and just got the notice from rock auto now I replaced that with the centec 14142523 . I should have that Friday Sent from my iPhone using Classic Zcar Club mobile Link to comment Share on other sites More sharing options...
AZDatsun Posted August 8, 2018 Share #26 Posted August 8, 2018 Also just noticed on the centec calipers if you select your car as an 85 the caliper states fits to 12/85 and if you choose a 1986 maxima is states from 1/86 but they are the same part# So that’s going to be confusing Sent from my iPhone using Classic Zcar Club mobile Link to comment Share on other sites More sharing options...
Chickenman Posted August 9, 2018 Author Share #27 Posted August 9, 2018 All I can say is... " Welcome to my nightmare " . LOL. I talked to my local Parts supplier and he says that the problem of Calipers with mismatched parts is becoming worse and worse. He had to order six sets of calipers from four different Vendors to get the correct ones for a Chrysler PT Cruiser. Good Luck keep at it. I'm still farting about with my E-Brake brackets. I'll report back on those once I get caught up on the other big projects that I decided to do all at once. Link to comment Share on other sites More sharing options...
AZDatsun Posted August 9, 2018 Share #28 Posted August 9, 2018 Yes the right one came!! Bracket has an N3 and a 63B on it Sent from my iPhone using Classic Zcar Club mobile Link to comment Share on other sites More sharing options...
AZDatsun Posted August 9, 2018 Share #29 Posted August 9, 2018 Also on the box if this helps anyone Sent from my iPhone using Classic Zcar Club mobile Link to comment Share on other sites More sharing options...
AZDatsun Posted August 23, 2018 Share #30 Posted August 23, 2018 The brake lines I received from zcardepot were the following for the disc conversion Sent from my iPhone using Classic Zcar Club mobile Link to comment Share on other sites More sharing options...
AZDatsun Posted August 23, 2018 Share #31 Posted August 23, 2018 Supposedly that fits the following vehicles Sent from my iPhone using Classic Zcar Club mobile Link to comment Share on other sites More sharing options...
AZDatsun Posted August 25, 2018 Share #32 Posted August 25, 2018 Chickenman can you post a picture of your emergency brake cable routing I do not understand how to get it routed. Do you need to take remove the cable out of the mount that hangs down from the body? Sent from my iPhone using Classic Zcar Club mobile Link to comment Share on other sites More sharing options...
Patcon Posted August 25, 2018 Share #33 Posted August 25, 2018 4 minutes ago, ryanotown22 said: Chickenman can you post a picture of your emergency brake cable routing I do not understand how to get it routed. Do you need to take remove the cable out of the mount that hangs down from the body? Sent from my iPhone using Classic Zcar Club mobile It is my understanding that you run the left cable to the right side and the right cable to the left side. The cables mount into two brackets up in the transmission tunnel. They are about 4" apart. so take the one in the passenger side bracket and loop it across to the drivers side and vice versa. Then rehang the springs to the spring clips to keep them up away from the drive shafts Link to comment Share on other sites More sharing options...
AZDatsun Posted August 26, 2018 Share #34 Posted August 26, 2018 Ok looks like 5/8” drill bit is the right bit to expand the bracket Sent from my iPhone using Classic Zcar Club mobile 1 Link to comment Share on other sites More sharing options...
Patcon Posted September 2, 2018 Share #35 Posted September 2, 2018 (edited) @Chickenman Edited September 2, 2018 by Patcon Link to comment Share on other sites More sharing options...
Patcon Posted September 2, 2018 Share #36 Posted September 2, 2018 Richard, I thought you posted a picture of a link that goes between the maxima caliper and the stock E brake, but I couldn't find it. Was that you? Thanks, Charles I Link to comment Share on other sites More sharing options...
zKars
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now