FYI - I have two of these rascals available if needed. I have no idea how I came to have only two, and yes - all four of mine are installed.  Too many beers between then and now to remember these details.

I'll look for my old ones. I don't throw anything out. Thank you very much.

  On 8/30/2018 at 8:26 PM, jfa.series1 said:

FYI - I have two of these rascals available if needed. I have no idea how I came to have only two, and yes - all four of mine are installed.  Too many beers between then and now to remember these details.

Given some time to think back I finally figured out how I have two extra bolt sets.  I had a machine shop press out the spindles on the control arms and one was stuck so badly that the control arm bent!  I ordered a replacement from the Z Barn (remember Roger?) and it came with the bolts installed - typical excellent service as always.

  On 8/30/2018 at 8:07 PM, jfa.series1 said:

That's some fine looking Canadian patina you have there!

That's notin', clean that up with my toothbrush.

How about this one?

  On 9/1/2018 at 2:08 AM, zKars said:

That's notin', clean that up with my toothbrush.

How about this one?

That'll buff right out

Looks like every part I took off my car...