pontiacguy Posted September 13, 2018 Share #1 Posted September 13, 2018 I posted a while ago asking if anyone had found a stainless clutch hose that fit 100% no one had the reason i asked is that i bought one from MSA and it was too loose to fit into the frame bracket retaining sleeve I contacted a company called techna-fit in indiana they said no problem send us your old one we will match it they did perfectly and the best part is the cost $ 10.00 plus shipping in the photos the longest one is MSA and looking down the one on the left is MSA the right techna - fit 1 Link to comment Share on other sites More sharing options...
pontiacguy Posted September 13, 2018 Author Share #2 Posted September 13, 2018 Just looked on their website part is listed as the-- tag reads --they have it listed for $ 25.00 i sent them an email letting them know it will fit 240/ 260 so maybe they already made this but didnt label it for 240/260 forgot to mention called the other z vendors and none had a line that would fit into the frame bracket retainer as the original did maybe im being too fussy but and i do appreciate the companys that sell Z parts BTW same with alot of the pontiac stuff -id only wish they would do a little more hands on fittament testing or at least in the part description let you know the non fitament details 1 Link to comment Share on other sites More sharing options...
Zed Head Posted September 13, 2018 Share #3 Posted September 13, 2018 (edited) I got an error message. https://www.technafitstore.com/searchresults.asp?Submit=Go&Search=ncl-110 I found this one though. http://www.technafitstore.com/NISSAN-Clutch-Line-Kit-p/nc-100.htm Edited September 13, 2018 by Zed Head Link to comment Share on other sites More sharing options...
pontiacguy Posted September 14, 2018 Author Share #4 Posted September 14, 2018 the web site is not the best at first i just sent an email asking if they could make one for me in the search type in--- 1979-1983 nissan 280z the part will come up as NC-110 now as i mentioned i sent them my old one and my label says ncl-110 not sure if there is any difference email them they respond and were great to deal with Link to comment Share on other sites More sharing options...
Patcon Posted September 14, 2018 Share #5 Posted September 14, 2018 17 minutes ago, pontiacguy said: the web site is not the best at first i just sent an email asking if they could make one for me in the search type in--- 1979-1983 nissan 280z the part will come up as NC-110 now as i mentioned i sent them my old one and my label says ncl-110 not sure if there is any difference email them they respond and were great to deal with Maybe it's longer, ie ncL-110 Link to comment Share on other sites More sharing options...
pontiacguy Posted September 14, 2018 Author Share #6 Posted September 14, 2018 Best bet email them or call them send em your old line ( they do brake lines as well) my thoughts great to deal with responed back ect Link to comment Share on other sites More sharing options...
Zed Head Posted September 14, 2018 Share #7 Posted September 14, 2018 Great info either way. Thanks for posting. If I recall right the brake lines have the same problem, I seem to remember having to use a wrench when I swapped calipers because the nut was too small on my Earl's brake lines. Weird that Earl's can't do metric or just decided that theirs were "close enough". http://www.technafitstore.com/Brake-Line-Kits-s/1825.htm Link to comment Share on other sites More sharing options...
pontiacguy Posted September 14, 2018 Author Share #8 Posted September 14, 2018 Patcon just got the line today they made it id guess a week and a half ago my main point great to deal with -call or email tell em what you want not trying to cause confusion when i emailed and said the application they didnt say we already make one my concern was the 19mm wrench end into the frame sleeve they said we have that size send us your old one and we can copy it Link to comment Share on other sites More sharing options...
pontiacguy Posted September 14, 2018 Author Share #9 Posted September 14, 2018 Zed head yea the earls line has an close but no- cigar SAE size- work great for old american cars like my 68 firebird i hope this helps if you needed brake lines id say send em your old ones and as im so happy with they have metric outer diamiters Link to comment Share on other sites More sharing options...
pontiacguy Posted September 14, 2018 Author Share #10 Posted September 14, 2018 zed head i think im gonna- guess- Earls bread and butter is hot rods resto mods ect but old american so id say they dont have metric outer fittings and again i appreciate MSA and all the other z vendors-but all of them missed the mark on the line fitting in the sleeve why i dunno cost ect and yes as said you can use any of thier lines wrench em up then slip them in the bracket and clip em i just got a bit over the top on this one Link to comment Share on other sites More sharing options...
pontiacguy Posted September 14, 2018 Author Share #11 Posted September 14, 2018 Im gald to help -its not easy to keep these cars going and certainly a bit frustrating when a part dont fit and this is a great forum my thanks to all others for the research and sweat equity ive leaned alot here as well -thanks to all Link to comment Share on other sites More sharing options...
Wilbur
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now