Quarter window lower rubber glass to door seal

[240Ziggy]

I'm curious so I took a look at my original 12/71 built.

Sent from my rotary phone using Classic Zcar Club mobile

[7tooZ]

I believe those go on the door. I can send photo later


72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

72 body and block, everything else 71, Tokico springs, Illumina, R180 CLSD, 83 close ratio, 3.90 gears, Ztherapy SUs, BRE 15X7 Libre wheels and BRE front spoiler.

[jackmau]

Those are not what I have. Mine came from Motorsport 34-1014 left.  34-1015 right. Never seen those placed there. Are those a new improved style maybe.

[7tooZ]

I believe I purchased mine directly from Nissan dealer in 2016. I will need to look for the receipt. Part number 80934-E4100

[jackmau]

Yeah those are correct for mounting on door. The ones I have mount on quarter window vertical and body of car.

[240260280]

Quote

 

 

[jackmau]

Thanks for the pics. Those are the exactly the sets I have. The top left and right seals are given how they mount with their groove that fits only one way nicely. The lower ones have a notch in them and every picture I've seen online has them differently placed or the picture is too grainy to tell. Getting Wick's book tomorrow so maybe I'll be able to see better true placement. 

[jackmau]

Yeah sorry for the previous post of wrong part #. It is 76840-76841 thanks for posting that 240260280.

[240260280]

[zspert]

Yes, the notch goes up and inboard

[Richie G]

On 11/2/2018 at 8:34 AM, 240260280 said:

 

About to do my windows, trying to determine if the main outer seal goes on frame first, then this corner piece over top or the small corner piece first then the main rubber?  i have a couple of the upper corner pieces on the way but not in hand yet to see what makes the most sense.  I'm guessing the main rubber then the corner fits in the channel of the main rubber?