Posted January 9, 20196 yr comment_565520 I've purchased my car a few years ago and never really did anything to the engine except for an oil change and new spark plug wires. I've decided to upgrade the ignition system by upgrading it to an electronic ignition and when I pulled my dizzy cap off to check the points system I found that it was already converted over to an electronic setup. I would like help identifying which electronic system is installed. See photos below. Looks to me that this may be an 280zx distributor swap. Can someone help me identify what I have installed? BTW...My Z is a 1973 240z I would like to upgrade the coil, as I have seen that a "flame thrower" coil would be a good upgrade. There's two options here, a 1.5 ohm and a 3.0 ohm coils. Which one should I get? Spark plug wires are new which I got from Datsun Spirit. Also what spark plug would you guys recommend? Any help would be much appreciated! Thanks Dan! Edited January 9, 20196 yr by Dan222000 Link to comment https://www.classiczcars.com/forums/topic/61369-need-help-identifing-my-electronic-ignition-setup/ Share on other sites More sharing options...
January 9, 20196 yr comment_565521 From first glance, I would agree that it looks like a 280ZX distributor. Link to comment https://www.classiczcars.com/forums/topic/61369-need-help-identifing-my-electronic-ignition-setup/#findComment-565521 Share on other sites More sharing options...
January 9, 20196 yr Author comment_565522 So how can I identify what year 280zx this came out of? I just check the ignition module and found that it is an E12-80. So after digging around it looks like this is out of a 1979-1981 280zx N/A. Can someone please confirm that this is correct? Also does anyone know what would be the recommended spark plugs and spark plug gap for this distributor? Thanks! Dan Link to comment https://www.classiczcars.com/forums/topic/61369-need-help-identifing-my-electronic-ignition-setup/#findComment-565522 Share on other sites More sharing options...
January 9, 20196 yr comment_565525 36 minutes ago, Dan222000 said: So how can I identify what year 280zx this came out of? I just check the ignition module and found that it is an E12-80. So after digging around it looks like this is out of a 1979-1981 280zx N/A. Can someone please confirm that this is correct? Also does anyone know what would be the recommended spark plugs and spark plug gap for this distributor? Early 280ZX sounds right. The later years had an extra pin on the module, to change timing for emissions reasons. E12-92 and -93 I think. E12-80 is the basic module. Your simplest route to best performance from the system is to download a 1979 FSM and match the coil specs, and spark plug gap. A stock 00.84 - 1.02 ohm coil will give better performance than a Flamethrower probably. Nissan balanced the parts, the module and the coil, for best performance. Link to comment https://www.classiczcars.com/forums/topic/61369-need-help-identifing-my-electronic-ignition-setup/#findComment-565525 Share on other sites More sharing options...
January 9, 20196 yr Author comment_565534 Thanks Zed Head! Link to comment https://www.classiczcars.com/forums/topic/61369-need-help-identifing-my-electronic-ignition-setup/#findComment-565534 Share on other sites More sharing options...
Create an account or sign in to comment