Dead of winter in Michigan, an old man's fancy turns towards tinkering with old Datsuns.

I'm working on a '72 and need heater control knobs.  I'm find the early ones stupid pricey.  Will the later ones not fit or are they just wrong?  I don't care about "wrong" just that they fit.  I even went so far as to model them for 3-D printing, turned out "okay" but by the time I get them functional I could have bought them.

Before I spend hours trying to get my printed ones working, will newer style fit? Or any other style?.

Also we need a heater control cable clamp.  One of these:

https://smhttp-ssl-72803.nexcesscdn.net/media/catalog/product/cache/1/small_image/770x/602f0fa2c1f0d1ba5e241f914e856ff9/2/2/22300825.jpg

The later knobs from 260Z/280Z do fit, they are simply push on and don't have a retaining screw like the early ones.  I have a heater control panel from a 12/70 parts car and it has them on the control levers, they seem adequate. The part number is 27148-Y0100 and they were used from 08/73 forward.

HTH

Mike

Here are some currently on ebay:

https://www.ebay.com/itm/Datsun-Heater-AC-Control-Knob-Set-260Z-280Z-OEM-NEW/312432105152?hash=item48be6796c0:g:rusAAOxy5jxSdrR

Same seller also has a set of early ones, but they are missing the screws, like you said they are pricey.

The new ones from nissan are more rounded vs square original style. original style reproductions

https://www.240zrubberparts.com/apps/webstore/products/show/4484439

Edited January 27, 20196 yr by nix240z

@nix240z Your early ones look good, and the price is good as well compared to ebay sellers.

  On 1/27/2019 at 5:01 PM, CanTechZ said:

Here are some currently on ebay:

https://www.ebay.com/itm/Datsun-Heater-AC-Control-Knob-Set-260Z-280Z-OEM-NEW/312432105152?hash=item48be6796c0:g:rusAAOxy5jxSdrR

Same seller also has a set of early ones, but they are missing the screws, like you said they are pricey.

Yes, thanks, those are the ones that prompted my asking, pulling trigger now