About 75% of the APEX kit showed up today ... thanks Black Friday!

 

Looks like we're gonna do this thing

Spent a few hours blasting this week... mainly testing the setup before getting serious Lol...Before.....

After a bit of testing using copper slag ....

 

Nice to see some clean metal...

Nice! Keep going!!!!

On 12/10/2023 at 12:58 PM, ConVerTT said:

So this project is leaning in the restomod direction now.  I sold the l28, kept my rb25det, and bought a "spare" rb25de that just happened to show up here locally....still deciding on naturally aspirated or turbocharged....

Here is the new scope...blue mean "acquired', red means "pending/TBD"....

The current plan is to make sure everything fits before sending her to paint (hopefully some time this summer)...

Brandon just fired up his new RB 26 normally aspirated. These are the numbers you’re looking at. The Datsun Spirit stroker does equally as well or better……much cheaper and more available parts. Just my humble opinion. Great work and I love the NSX! 
 

Safari Gold...mmmmm....

 

yeah I figured  NA RB would be in that range ... 

 

You have great taste in cars 😉 

You and yellow cars…!

2 hours ago, ConVerTT said:

Safari Gold...mmmmm....

 

yeah I figured  NA RB would be in that range ... 

 

You have great taste in cars 😉 

Yeah I’m a Sicko….Just like all the Sickoes on this site 😂 

Your work is incredible….you must love puzzles too since it’s so much easier to buy a fairly rust free Z still these days. I would love to be closer to learn your techniques and borrow your tools. 😂 So much fun to watch your progress…..glad you are letting us tag along for the journey! I’m sure @Patcon would love to be closer too…..you guys have all the patience I’m lacking. Can’t wait to see the final product.

Good Luck

Guy

Edited January 6, 20241 yr by Diseazd

2 hours ago, Diseazd said:

Yeah I’m a Sicko….Just like all the Sickoes on this site 😂 

Your work is incredible….you must love puzzles too since it’s so much easier to buy a fairly rust free Z still these days. I would love to be closer to learn your techniques and borrow your tools. 😂 So much fun to watch your progress…..glad you are letting us tag along for the journey! I’m sure @Patcon would love to be closer too…..you guys have all the patience I’m lacking. Can’t wait to see the final product.

Good Luck

Guy

Thanks for your kind words 🙏.

I certainly do love a good puzzle...and there's no such thing as a rust free 240z 😉. ( but yeah ... maybe could have started with a better car 🤦‍♂️).  (pS ... but with the kfvintage parts you don't really need much more than the trans tunnel these days LOL)

 

 

Some of us are close by… [emoji51]

@ConVerTT Is there a layer of undercoating that you have removed with the copper slag? or was that paint?

18 minutes ago, heyitsrama said:

@ConVerTT Is there a layer of undercoating that you have removed with the copper slag? or was that paint?

It's mostly thick undercoat (spare tire well) and heavy dirt/paint elsewhere 

Another 2.5 hours with the blaster...recycled glass this time.   It cuts great but it's dustier.  2.5 hours is about the maximum even with full PPE because it gets dusty to the point where you can't see.  I might add a slow downdraft fan (but trying to keep this booth cheap and temporary)....

Again...super happy to see so much good metal.   Looks like I've cut out most of the cancer already...(ran out of time before getting the last bit by the firewall.  It should come right off next session)

 

Before ...

 

She's come a long way back ...

 

Edited January 7, 20241 yr by ConVerTT
Typo