Not sure, waiting for Zed Head to reply on the differences

I could have swore that I tried a regular z vac pot on the zx one when I started having a problem with mine. And it fit.

27 minutes ago, Zed Head said:

The ZX vacuum cans are different from the 280Z units.

Zed Head, are you talking actual size of the "can" or function?

Edited February 21, 20196 yr by rcb280z

I going to see if I kept my old vacuum can from my 77 distributor and see if it fits in the 80 unit.

1 minute ago, rcb280z said:

I going to see if I kept my old vacuum can from my 77 distributor and see if it fits in the 80 unit.

Awesome, thanks!

21 minutes ago, rcb280z said:

Zed Head, are you talking actual size of the "can" or function?

The round part that fits in to the distributor is smaller and the arm is a different length.  If I recall right.  Always worth double checking.

 

I happen to have my box of distributor parts down.  I'll dig around and confirm.

I did still have a vac can for a 77 280 that is defective. Going to die sect it some day.

I installed it in the 80 dizzy with no problem. Same goes with the new one, 81 maxima, and it fit.

 

My mistake.  I might have been thinking of breaker plates.  

Did you check that the arm attaches to the same spot on the breaker plate?

There is only one difference, minor one. The vac inlet port is on top now where the 280 inlet is on the bottom side of the can. Get some extra vac line just in case. I didn't need any but.....

1 minute ago, Zed Head said:

Did you check that the arm attaches to the same spot on the breaker plate?

Yes it does. With the same screw also.

It's also attached to the dizzy body the same way as well.

Chasincats, I'd go for it. They only have one left.

And my advance numbers are the same as it was with the 77 vac can and dizzy. Around 35 deg. Which is whats it been for a very long time.

Edited February 21, 20196 yr by rcb280z