Just got the complete set lf msa 3 point seat belts for my 1972 240z. Will i be able to use the stock receivers or just the one from the kit. I read that i also have to remove the center console to fasten the buckle holder in case i wont be able to use the stock ones. Anyone?

I used a different set from Wesco because it can be installed in the series 1 car without having to drill additional holes. I didn't have to remove the console for the inner buckle strap install. I used the stock attachment point that is accessible without removing the console. I doubt the MSA belt would require console removal, from the picture it looks like the inner belt piece uses the stock mounting point too.

https://www.wescoperformance.com/roadster-seat-belt-eb.html

You still have not told me how did you installed the retro belt msa seatbelt sets. The kit even brought this holder but no instructions on how and where it is installed.

I'm probably late to the party but that extra piece goes under the center console to hold the two receivers from falling in-between the seats. That's also why it says you have to remove the center console.

Adding @Joseph@TheZStore and @James@TheZStore, they may have some tips...

Mike

How exactly do you fasten this seatbelt holder?

The seat belt holder is mounted underneath the center console using the forward mounting screw inside the recessed area.

Thankd