Has anyone got any links to any good 2.7(ish) engine builds?

I'm going the hard way about it(140mm rods etc) however looking forward to having something a little from the norm.

I've got the last few bits on the way now so would like some interesting reading/research.

Edited April 4, 20196 yr by Jason240z

and I was just about to send you a link to this post - then I realised it's you!!!! [emoji1787] :p

 

 

Ps. Seen this ?

https://forums.hybridz.org/topic/102748-build-after-24-years/

 

The curse of keeping the original block!

Yes seen that one... just no more!!

There's this from Australia https://www.viczcar.com/forum/topic/15125-l24-stroker-build/

2 hours ago, riceburner said:

There's this from Australia https://www.viczcar.com/forum/topic/15125-l24-stroker-build/

Thats a lovely build there.  He builds the best L series in the world though(probably!).

I'm

+3mm pistons(29mm pin)

280 crank

140mm rods

so a lot more conventional.

I just fitted a stroker I built many years ago. Used a standard l24 block, l28 crank, l24 pistons and rods. Shaved the difference  in the rods off the top of the dished pistons which ended up as flat tops. E88 head with some port work and mild can. Still running in but can feel a big improvement over my old stock l24.