wheels, seats, motor, diff, carbs etc

[drmattyg]

For sale/ trade

280z gray cloth seats(lever to fold forward) look refurbished, 1 small tear on drivers side seat kidney support, very good condition $200 takes them both

4 14inch centerline autodrags(could be knockoffs...don't have any real centerlines to compare to) I want to trade these for different wheels...14 or 15 with good tires. These aren't my style really. Also, these have very good tires on them and would go with the wheels.

r180 3.36 diff in parts, but all there. just have to put the gearing back in the case and bolt on the side flanges. No special tools required. Took about 10 minutes to unbolt the flanges and slide the gearing out so it should take 10 to bolt it back together. $40 or something similar

r180 mustache bar and half shafts. -$50?

280z motor. complete with some FI stuff, but not much. $100 or similar

73 carbs and filter housing. Comes with air filter with 10 hours driving on it. $40

280z drive shaft $50?

drmattyg@yahoo.com for more info

[drmattyg]

ps-I'll also trade for some performance stuff. In particular eibach springs or some nice 14 or 15 inch rims and tires. Other offers welcomed.

[drmattyg]

PSS-by nice wheels and tires I mean just some stock rims from a 280z or 280zx. I really like the stock 6 spoke looking ones from a 280, and also some of the early slotted mags. I am also willing to trade "appliance" style wheels for either of these. take your pick. All I'm looking for is a new look. I am willing to straight up trade.

drmattyg@yahoo.com

[drmattyg]

alright,

seats-150

diff-30

mustache bar and shafts-40

carbs-30

make offers

[SMW]

1. Where are you located?

2. Is the L28 still available?

3. If yes, which head/block combination is it?

Thanks in advance,

Steve

[drmattyg]

i am in moraga ca. the l28 availability is pending a trade. If the trade falls through, it is available. If you have springs to trade, then I might give you preference depending on which kind. I am looking for ST or MSA. The stiffer the better. I will let you know when I find out. ALso, its an n47 head and block to match.