Transmission Crossmember Mount Bushing (Rubber)?

[Kevin McSweeney]

I hate to start a new thread over something so (seemingly) trivial, but I've search all over and cannot find anything.

I'm replacing most/all of the bushings in my 280z. Some I'm doing urethane, some I'm retaining rubber. It's a street car and I don't want it to be unbearable.

Anyway, I cannot find a rubber transmission crossmember bushing anywhere. Only polyurethane - and this is one area I definitely want to avoid urethane.

Any help is appreciated.

Edited May 31, 2019 by Kevin McSweeney

[Terrapin Z]

https://www.nissanparts.cc/oem-parts/nissan-insulator-mount-11320n3000

 

[Kevin McSweeney]

That is the mount insulator, like pictured below: https://zcarsource.com/transmission-mount-insulator-240z-260z-280z-280zx-70-83-new-oem

I'm looking for the transmission crossmember bushings, like these: https://www.energysuspensionparts.com/7.1101 except in rubber.

[Terrapin Z]

I understand better now. Those are discontinued from Nissan, unfortunately.

You might be better off finding a used mount with bushings in it that are in better shape than yours. JMO

 

[Kevin McSweeney]

2 minutes ago, Terrapin Z said:

I understand better now. Those are discontinued from Nissan, unfortunately.

You might be better off finding a used mount with bushings in it that are in better shape than yours. JMO

 

Oh, thanks for the info. I may have to go to urethane then!

[Patcon]

49 minutes ago, Terrapin Z said:

https://www.nissanparts.cc/oem-parts/nissan-insulator-mount-11320n3000

 

They're proud of that

[Terrapin Z]

With the frame mounts poly, and the trans mount rubber, I would think it wouldn't be too bad. It is a personal choice to be sure. My 70 has no mounts like that, but I don't mind at all. 

9 minutes ago, Patcon said:

They're proud of that

Yes they are.

[EuroDat]

You will feel a little more engine vibration through the trany mount with PU bushes. It's no where near as bad as the mustache bar insulators on the diff.

For street cruising I would keep the transmission  cross member and mustache bar mount original or find a good donor car to replace them like I did. I tried PU on them and now back to the original style

[adivin]

Are the OEM bushings available from anywhere?