jalexquijano Posted November 10, 2020 Author Share #97 Posted November 10, 2020 I am talking the cylinder head out to verify everything is fine and replace all seals. Im done with testing. 6 years testing and same issue. 2 Link to comment Share on other sites More sharing options...
jalexquijano Posted January 20, 2021 Author Share #98 Posted January 20, 2021 Can someone elaborate in the correct and safe procedure to remove the cylinder head and replace the broken or torn valve seals on cylinder 4? I watch a video on youtube of a guy inserting a rope inside cylinder 4 and a special tool to decompress the retainer spring. I guess its.better to remove the complete head. Also which gaskets will i need to replace? Link to comment Share on other sites More sharing options...
Mark Maras Posted January 20, 2021 Share #99 Posted January 20, 2021 I don't see the need to remove the head. Either way you'll have to come up with a valve spring compressor. IF, the compression is satisfactory in all cylinders, leave the head on. Removing it may open a Pandora's Box of broken bolts and studs. The rope in the cylinder and the lever action spring compressor is the easiest method of changing the seals. Watch several different videos until you can't find anything else to learn and then go for it. That's what I do. 2 Link to comment Share on other sites More sharing options...
siteunseen Posted January 20, 2021 Share #100 Posted January 20, 2021 I agree with Mr Maras. You are only focused #4 so I assume you'll pull the head for that one cylinder? I would take the easiest route and try the rope technique first. He's right you'll need a valve spring compressor. The first time I had to do that I bought a $15 from a chain store. It worked for me. Link to comment Share on other sites More sharing options...
Mark Maras Posted January 20, 2021 Share #101 Posted January 20, 2021 Mr,? 2 Link to comment Share on other sites More sharing options...
siteunseen Posted January 20, 2021 Share #102 Posted January 20, 2021 Yes! Respect, like formally Mr Biden. President Maras? I like that. Link to comment Share on other sites More sharing options...
Mark Maras Posted January 21, 2021 Share #103 Posted January 21, 2021 Thanks, but No Thanks. I waded into the corporate world of banking and manufacturing when I was younger. I started to run into superiors? that asked me for a loyalty oath. That told me all I needed to know. Long story short, I found that creating something with my mind and hands, as well as treating others as US rather than THEM , to be far more satisfying than chasing money and power. 3 Link to comment Share on other sites More sharing options...
siteunseen Posted January 21, 2021 Share #104 Posted January 21, 2021 A Banker!? I would've never guessed that. 1 Link to comment Share on other sites More sharing options...
Captain Obvious Posted January 21, 2021 Share #105 Posted January 21, 2021 He didn't say he was a banker. He said he was in the "world of banking and manufacturing". I'm guessing he was "manufacturing" something that went into a bank.... They demand loyalty in the printing industry, right? Link to comment Share on other sites More sharing options...
Mark Maras Posted January 21, 2021 Share #106 Posted January 21, 2021 Wow, you're good. Check printing, credit card embossing along with all the paperwork that banks used back then. Curiously, later on as I tried other occupations, I ran into that same loyalty oath in the upper management. That was one of the things in my life that drove me to study Behavioral Psychology. I found the answers to a lot of "Abby Normal" behavior there. 1 Link to comment Share on other sites More sharing options...
Captain Obvious Posted January 21, 2021 Share #107 Posted January 21, 2021 Haha!! Actually it was an accidental hit. I was joking that maybe you were printing something more green. On your printing press in the basement. 2 Link to comment Share on other sites More sharing options...
Mark Maras Posted January 21, 2021 Share #108 Posted January 21, 2021 I must admit, the thought did cross my mind. Especially with access to the supplies. Back to the loyalty oath. It had nothing to do with security. On the contrary, it had everything to do with insecurity. 1 Link to comment Share on other sites More sharing options...
Parman
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now