2 Datsun 240Z Tokico struts needed

[Diseazd]

I have a blown rear Tokico shock in my Ground Control sectioned coilovers. Problem is, Tokico shocks are no longer offered. I ordered a pair of Koni yellows for 240Z front ( front shocks are used in the rear of sectioned GC 240Z coilovers). The Konis are about 3/8 inches too tall and the gland nut won’t engage the threads in the top of the strut tube. If anyone has a Tokico strut laying around, or knows where I could find one, I would love to buy it. I can get by with one, but would like to replace both rears.

Thanks

Guy

Edited July 6, 2019 by Diseazd

[zKars]

Guy I have a few used Tokico struts laying around. Let me go see what PN's I have. 

[Diseazd]

Thanks Jim.....front or back....doesn’t matter.....just knock off the spacer on the rear.

[zKars]

A pair of HZ3012 and four HZ3038's. From a 76 280 apparently. I wonder if they fit in 2" tubes....

Edited July 7, 2019 by zKars

[Diseazd]

3015 or 3016 are the serial numbers for front and back.

[zKars]

The 3012 and 3038's are both 1.70 OD and  have 14-13/16" long bodies. All I got

Edited July 7, 2019 by zKars

[Diseazd]

3012 are the same as 3015.....according to an older thread. I’d love to have those two. 

[zKars]

Then they shall be yours.

[Diseazd]

I love this site!