Hi,

 

What are the tricks to remove these green beauties?

 

Thanks!

I last did this about 16 or 17 years ago...

I unplugged the switch from the dash harness. Then if memory serves, I had to push and twist to remove the knob.

I took a pair of long nose pliers that had a very fine point on the ends of the jaws and used those to unscrew the retaining ring.

Then you have to figure out where the hell the spring went that supplied tension to hold the knob onto the end of the shaft.

When reinstalling, you have to curse like hell trying to get the optical fiber back in place to light the knob.

Edited July 24, 20195 yr by SteveJ

Perfect!  Thanks a million Steve!

Glad to help.

By the way, if you find the spring from my hazard switch, let me know. 

It worked like a charm.  I tore it apart and refreshed.  Rear turn lights now work on my buddy's car. Thanks again!

But did you find my spring?