Fender Emblem Installation

[Jughead]

ZedHeads, 

Whats the best way to install the "DATSUN" fender emblems.  I juts got my new one and want to make I do it right the first time.  Is it as simple as pushoing the posts thu the holes until the lock washers engage?  Glue recommended?  Anything else?  THANKS!!!!

[grannyknot]

There should be a thin metal sleeve on the plastic post on the back of the emblem, take the sleeves off the post and insert them into the holes then install the emblem into those sleeves.  You can also use double stick trim tape.

[siteunseen]

New emblems should come with those barrel clips. I bought some from my local Nissan's parts department. Part number is in the first post..

 

[Av8ferg]

Cliff,
I’m officially assigning you as the forum librarian. You seem to be able to find all old threads at the drop of a hat.


Sent from my iPhone using Tapatalk

[grannyknot]

36 minutes ago, Av8ferg said:

Cliff,
I’m officially assigning you as the forum librarian. You seem to be able to find all old threads at the drop of a hat.


Sent from my iPhone using Tapatalk

I don't know Cliff, that's going to make you sound... respectable.  Do you think you can pull it off?

 

[siteunseen]

11 hours ago, Av8ferg said:

Cliff,
I’m officially assigning you as the forum librarian. You seem to be able to find all old threads at the drop of a hat.


Sent from my iPhone using Tapatalk

Heavy on the idiot...

id·i·ot sa·vant

noun

1. a person who has a mental or learning disability but is extremely gifted in a particular way, such as the performing of feats of memory or calculation.

Edited August 15, 2019 by siteunseen

[87mj]

I posted a similar question a few weeks ago.  The recommendation I received was to install the clips on the posts.  Then push the emblem into the holes.  That would prevent the barrel clip from getting pushed through the back side of the fender.  I followed that recommendation and it seemed to work for me. 

Maybe the librarian can sort this out and get back to us?  :)

[Captain Obvious]

LOL. Cliff in a library? This is what I picture:

 

[rcb280z]

No dresses Cliff, jeans only for you! 

[rcb280z]

But while your up there can you bring me down a bottle of..............

[siteunseen]

6 hours ago, 87mj said:

I posted a similar question a few weeks ago.  The recommendation I received was to install the clips on the posts.  Then push the emblem into the holes.  That would prevent the barrel clip from getting pushed through the back side of the fender.  I followed that recommendation and it seemed to work for me. 

Maybe the librarian can sort this out and get back to us?  ?

Thats what I did on my hood emblem when I removed it for cut and buff of the old paint when I first bought the car.  They made a click noise when they were seated. I did not push them up onto the plastic post.  Barely on then pushed the emblem down, click click.

[siteunseen]

6 hours ago, 87mj said:

Maybe the librarian can sort this out and get back to us?  ?