Av8ferg Posted August 15, 2019 Share #1 Posted August 15, 2019 Hey guys, I have 5 hours to burn and have found a cool salvage yard. It has three 280z’s and one 240z. If you need something that’s not really big or difficult to remove post in this thread and I’ll see what I can do for you. This is where I found Mikes ashtray for his 240z a few months ago. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
hiyabrad Posted August 15, 2019 Share #2 Posted August 15, 2019 What year is the 240? Link to comment Share on other sites More sharing options...
Av8ferg Posted August 15, 2019 Author Share #3 Posted August 15, 2019 7/71 build date. 1 Link to comment Share on other sites More sharing options...
madkaw Posted August 15, 2019 Share #4 Posted August 15, 2019 Damn- id have my 10mm working overtime 2 1 Link to comment Share on other sites More sharing options...
motorman7 Posted August 15, 2019 Share #5 Posted August 15, 2019 Koito Headlights? I need 2 Link to comment Share on other sites More sharing options...
Patcon Posted August 15, 2019 Share #6 Posted August 15, 2019 You should get the early gas cap and ring if it's not too bad. Have it plated or send it to Jim (jfa) to have it plated Link to comment Share on other sites More sharing options...
siteunseen Posted August 15, 2019 Share #7 Posted August 15, 2019 (edited) If it has the oe radio still, doubtful, 240260280 needs the knobs. The steering wheel is easy to get. And drum role here.......the carbs. I know they're gone but wishful thinking. Edited August 15, 2019 by siteunseen Link to comment Share on other sites More sharing options...
EuroDat Posted August 15, 2019 Share #8 Posted August 15, 2019 I have a couple of things I would like to have. If it's not too much trouble. 280Z: - The two fusable link holders on the passenger strut tower with about 12 inches of wire. It's the bottom section od POS#17 in the parts list drawing. Don't need the plastic covers or the links. - Engine bay wiring harness staps that click into the panels. - The 4x M3 clips on the 280Z grill. It's where the vertical bar connects to the bottom horizontal bar. Link to comment Share on other sites More sharing options...
siteunseen Posted August 15, 2019 Share #9 Posted August 15, 2019 I recently received a fusible link upgrade from a Cadillac car from @wal280z I'm not doing the swap until it cools off here, October maybe? If I end up not using those you're welcome to them. I haven't spent time reading the directions yet so I'm not positive it's still used? Link to comment Share on other sites More sharing options...
gwri8 Posted August 15, 2019 Share #10 Posted August 15, 2019 If there is an early 77' with the sloped rear panels, I'm looking for the interior plastic rear finish panel, #47 in this picture. I'm also looking for #'s 25 & 26 (side sloped panels). Thanks! Link to comment Share on other sites More sharing options...
Av8ferg Posted August 15, 2019 Author Share #11 Posted August 15, 2019 You should get the early gas cap and ring if it's not too bad. Have it plated or send it to Jim (jfa) to have it plated Got the 240z gas cap.Anybody need one? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
siteunseen Posted August 15, 2019 Share #12 Posted August 15, 2019 24 minutes ago, gwri8 said: If there is an early 77' with the sloped rear panels, I'm looking for the interior plastic rear finish panel, #47 in this picture. I'm also looking for #'s 25 & 26 (side sloped panels). Thanks! Do you have the elastic cord and hook that holds the rear deck while messing with the spare? Those are mostly broken. Link to comment Share on other sites More sharing options...
Parman
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now