Hey guys, I have 5 hours to burn and have found a cool salvage yard. It has three 280z’s and one 240z. If you need something that’s not really big or difficult to remove post in this thread and I’ll see what I can do for you. This is where I found Mikes ashtray for his 240z a few months ago.

 

 

Sent from my iPhone using Tapatalk

What year is the 240?

7/71 build date.  

Damn- id have my 10mm working overtime 

Koito Headlights?  I need 2

You should get the early gas cap and ring if it's not too bad. Have it plated or send it to Jim (jfa) to have it plated

If it has the oe radio still, doubtful, 240260280 needs the knobs.

The steering wheel is easy to get. And drum role here.......the carbs.  I know they're gone but wishful thinking.

Edited August 15, 20195 yr by siteunseen

I have a couple of things I would like to have. If it's not too much trouble.

280Z:

- The two fusable link holders on the passenger strut tower with about 12 inches of wire. It's the bottom section od POS#17 in the parts list drawing. Don't need the plastic covers or the links.

- Engine bay wiring harness staps that click into the panels.

- The 4x  M3 clips on the 280Z grill. It's where the vertical bar connects to the bottom horizontal bar.

I recently received a fusible link upgrade from a Cadillac car from @wal280z

I'm not doing the swap until it cools off here, October maybe? If I end up not using those you're welcome to them.  I haven't spent time reading the directions yet so I'm not positive it's still used? 

 

If there is an early 77' with the sloped rear panels, I'm looking for the interior plastic rear finish panel, #47 in this picture.  I'm also looking for #'s 25 & 26 (side sloped panels).  Thanks! 

You should get the early gas cap and ring if it's not too bad. Have it plated or send it to Jim (jfa) to have it plated

Got the 240z gas cap.

Anybody need one?






Sent from my iPhone using Tapatalk

24 minutes ago, gwri8 said:

If there is an early 77' with the sloped rear panels, I'm looking for the interior plastic rear finish panel, #47 in this picture.  I'm also looking for #'s 25 & 26 (side sloped panels).  Thanks! 

Do you have the elastic cord and hook that holds the rear deck while messing with the spare? Those are mostly broken.