Popular Post wrecked2001 Posted September 14, 2019 Popular Post Share #1 Posted September 14, 2019 Hey guys, long time between post. I would like to share some good news. I picked up my S30 for $500 dollars.It had the usual rust issues, battery area, passenger side floor board due to ruptured heater core and spare tire well.But other than that being a Texas car and being stored on gravel it is pretty solid. The biggest issue which would have been make or break was the Rad Support. The car look like it had incident with a curb. The front of the front drivers side frame rail was wrinkled along with the Rad Support on that side. Someone tried to straighten it in the past with little success. To make long story short i couldn't find a replacement in the junk yards or online anywhere. Let me introduce you to Auto Panel Solutions. They are a Mom and Pop business based out of the UK. The contacted me on Facebook to let me know about their new kit. I ordered it immediately. The quality is good, though I haven't fitted it yet. Here is a pic,I can upload more.If you check them out on Facebook they have a multitude of patch-panel solutions for the S30. They are based in the UK so you know they know about rust and how to fix it. Any question I would be happy to answer. 5 Link to comment Share on other sites More sharing options...
Namerow Posted September 14, 2019 Share #2 Posted September 14, 2019 Impressive, to say the least. I just took a quick look at their Facebook site and discovered more offerings that will interest CZCC members... like complete and partial firewall panels, for example. The detailing is very impressive. I have a suspicion that they're dimensionally accurate, too. Customer reviews (there are lots on the site) will probably tell the story on that point. Would you care to share with the rest of us the price you paid for the rad support kit? Link to comment Share on other sites More sharing options...
Patcon Posted September 14, 2019 Share #3 Posted September 14, 2019 A link to their page would be good too Link to comment Share on other sites More sharing options...
wheee! Posted September 14, 2019 Share #4 Posted September 14, 2019 Don’t show this to@convertt Wish I would have seen this 4 years ago. My rad support was pretty crappy. Link to comment Share on other sites More sharing options...
wrecked2001 Posted September 14, 2019 Author Share #5 Posted September 14, 2019 48 minutes ago, Namerow said: Impressive, to say the least. I just took a quick look at their Facebook site and discovered more offerings that will interest CZCC members... like complete and partial firewall panels, for example. The detailing is very impressive. I have a suspicion that they're dimensionally accurate, too. Customer reviews (there are lots on the site) will probably tell the story on that point. Would you care to share with the rest of us the price you paid for the rad support kit? I paid $640 shipped, taxes and customs, with the exchange rate. You can buy all the individual pieces of this kit separately, I just chose to buy the the whole thing. 4 Link to comment Share on other sites More sharing options...
wrecked2001 Posted September 14, 2019 Author Share #6 Posted September 14, 2019 42 minutes ago, Patcon said: A link to their page would be good too I spoke to Kim, she does the marketing. They don't have a page yet, just Facebook and Ebay Link to comment Share on other sites More sharing options...
wheee! Posted September 14, 2019 Share #7 Posted September 14, 2019 Ugh. Book of Feces.... Link to comment Share on other sites More sharing options...
Patcon Posted September 14, 2019 Share #8 Posted September 14, 2019 I was talking about the link to their facebook page Link to comment Share on other sites More sharing options...
ConVerTT Posted September 14, 2019 Share #9 Posted September 14, 2019 2 hours ago, wheee! said: Don’t show this to@convertt Wish I would have seen this 4 years ago. My rad support was pretty crappy. haha - looks about right! There are two little right angled brackets not shown, so 13 pieces in all. I had "fun" making one -probably won't do it again.... Link to comment Share on other sites More sharing options...
ConVerTT Posted September 14, 2019 Share #10 Posted September 14, 2019 1 minute ago, ConVerTT said: haha - looks about right! There are two little right angled brackets not shown, so 13 pieces in all. I had "fun" making one -probably won't do it again.... Actually that is not true. I might take all the cardboard templates to get a set laser cut - it would be much faster. Link to comment Share on other sites More sharing options...
ConVerTT Posted September 15, 2019 Share #11 Posted September 15, 2019 3 hours ago, wrecked2001 said: I paid $640 shipped, taxes and customs, with the exchange rate. You can buy all the individual pieces of this kit separately, I just chose to buy the the whole thing. I think that is pretty reasonable actually 1 Link to comment Share on other sites More sharing options...
wrecked2001 Posted September 15, 2019 Author Share #12 Posted September 15, 2019 https://www.facebook.com/Auto-Panel-Solutions-418351785395614/ 1 Link to comment Share on other sites More sharing options...
zKars
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now