conedodger Posted October 29, 2019 Share #1 Posted October 29, 2019 You guys using aftermarket EFI, particularly Haltech, what electronic throttle body and electronic pedal are you using. I’m told Nissan used the same throttle body bolt pattern for decades so that is an obvious starting point... im going to use a Haltech Elite 2500 so it makes sense to use it to its fullest potential. im using a stock 280Z intake that has been extrude honed. Link to comment Share on other sites More sharing options...
zKars Posted October 29, 2019 Share #2 Posted October 29, 2019 Generally I see no point in drive by wire for "routine" use. If you have a good TPS, that's all the ECU needs to know about gas pedal position. Setting up a drive by wire is not trivial from what I've read. Also factor in the obvious old guy factor that wants a hard mechanical connection between my right foot and the throttle blades and you might need to temper my comments some... 3 Link to comment Share on other sites More sharing options...
conedodger Posted October 29, 2019 Author Share #3 Posted October 29, 2019 It’s a because I can kind of thing. It’s safer too. Can’t get stuck at WOT. I just popped the hood on two of my five cars and found DBW. Most things with Haltech are basically tell the ECU it’s there and it will figure it out on its own. Link to comment Share on other sites More sharing options...
wheee! Posted October 29, 2019 Share #4 Posted October 29, 2019 I'm not sure if the DBW is really worth the added mods versus the TPS and a good throttle cable to replace the old linkage. Then you would have less need for the Elite 2500 and could go Elite 750 and save $1000.... Link to comment Share on other sites More sharing options...
conedodger Posted October 29, 2019 Author Share #5 Posted October 29, 2019 Mark, as my dad used to say, ‘kid, don’t concern yourself with my money.’ ‘ I earned it and I’ll spend it the way I want!’ I hear you though... 1 Link to comment Share on other sites More sharing options...
240260280 Posted October 29, 2019 Share #6 Posted October 29, 2019 I had DBW on my Rav 4 and it sucked... no resolution at low rpms. Really jerky when parking or going very slow. I hate it! Just like electrical power steering at the column... it usually sucks. They rebuild the wheel to make it cheaper, not better. Digression. If you ever drive in sock or bare feet, you will be amazed at huge step in precise throttle control. DBW does not have this. It is like driving with winter boots on. Link to comment Share on other sites More sharing options...
Captain Obvious Posted October 30, 2019 Share #7 Posted October 30, 2019 Certain year Sentras are drive by wire. My notes say this is 03-06. Not positive about the mounting bolt pattern, but I think it's the same as the Z: Link to comment Share on other sites More sharing options...
Yarb
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now