Thanks guys, I found a fastener list for 510's on the 510realm so I'll put that in the proper forum.

I've been documenting fasteners in a spreadsheet because I will be sending them off to get them plated and figured they will all get mixed together.  I want the right fastener in the right location.  The ways discussed so far would require looking up all the fastener part numbers, yes?  That may be totally sufficient but I could share what I have if desired.  Here is a sample:

front sway bar bracket	4	yellow zinc hex head bolts (7 on head) M8 X 1.25 - 20 mm under head - fully threaded
	4	yellow zinc M8 split lock washers
left rear bumper bracket	2	yellow zinc nuts M10 X 1.25
	2	yellow zinc split lock washers - M10
	2	yellow zinc flat washers - 22mm od - 10.5mm id
right rear bumper bracket	2	yellow zinc nuts M10 X 1.25
	2	yellow zinc split lock washers
	2	yellow zinc flat washers - 22mm od - 10.5mm id
Rear bumper	2	yellow zinc hex head bolts (4 on recess in head) M10 X 1.25 - 25mm under head - fully threaded
	2	yellow zinc nuts M10 X 1.25
	2	yellow zinc split lock washers - M10
	2	yellow zinc flat washers - 22mm od - 10.5mm id
	4	special chrome bolts - M6 X 1.0
	4	yellow zinc split lock washers - M6
	4	yellow zinc flat washers M6 - 14mm od - 6mm id
	4	yellow zinc hex nuts M6 X 1.0
	8	yellow zinc nuts with locking serrations - M6 X 1.0
Rear hatch latch assy	2	clear zinc phillips pan head machine screws with captive split lock washer - M6 X 1.0 - 15 mm under head fully threaded
	2	yellow zinc flat washers M6 - 14mm od - 6mm id

Maybe when you get that spreadsheet done you can post it in the downloads section, that's a great layout.

Absolutely!