Diseazd Posted April 4, 2020 Share #61 Posted April 4, 2020 (edited) A couple other nice straight sixes.....not mine. Turn the volume up! F3D64477-31A2-4671-83D6-2068CF272EEC.MOV 37FC2E77-88E5-407B-9594-A39AC8B2BEEF.MOV 53A992B8-737B-488B-AA95-5397D7DCBF30.MOV 13E87004-14B7-4637-AB77-AC2B5C335298.MOV Edited April 4, 2020 by Diseazd 1 Link to comment Share on other sites More sharing options...
heyitsrama Posted April 4, 2020 Share #62 Posted April 4, 2020 Im working on making my car more comfortable, i cleaned around the hatch of the car, added some sound-deadening inside the empty spare wheel well. Got the arm rest installed on the drivers door.... My buddy gave me some moving blankets, i just realized i could cut one up and have it go under the rear carpet for some additional dampening. ooof. gotta install the headliner back in the car, maybe this weekend.... 1 Link to comment Share on other sites More sharing options...
gwri8 Posted April 4, 2020 Share #63 Posted April 4, 2020 (edited) Took mine out on this pleasant sunny day. After the first mile I looked in the rear view mirror and noticed I had an unwelcome passenger....a red wasp! Had to go another 2 miles before I could pull over and open the rear hatch to let him free range. Glad traffic wasn't bad! Edited April 4, 2020 by gwri8 Link to comment Share on other sites More sharing options...
AK260 Posted April 4, 2020 Share #64 Posted April 4, 2020 Im working on making my car more comfortable, i cleaned around the hatch of the car, added some sound-deadening inside the empty spare wheel well. Got the arm rest installed on the drivers door.... My buddy gave me some moving blankets, i just realized i could cut one up and have it go under the rear carpet for some additional dampening. ooof. gotta install the headliner back in the car, maybe this weekend.... I did the sound proofing thing last summer - and wow!! It’s so much more enjoyable for a mere 10-15kgs more. I covered 40-60% of panels - you don’t need to cover the entire panel. I did the wheel well, rear deck, the doors made a HUGE difference, the trans tunnel, floors and some of the bulkhead. I wish I had the headliner loose like yours to do the same but didn’t want to rip it off. Do that one and you get a huge reduction in wind noise and resonance. Rear strut towers are particularly noisy parts of the car. So I did this ... I wish I had done a better video of the actual insulation but this was just to show some friends the difference ... [/url] Also, for the under carpet thing and between door cards and the doors I used closed cell foam like these ... 12mm under carpet, 1.5mm doors ... https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F282327879665 The MLV reduces panel vibration, the closed cell reduces reflections within the car. Upside: much less wind and road noise, far nicer cruising, you get to hear the exhaust better as it’s less like night club loud and more high end hifi loud. Downside: with all the white noise and resonance gone, you can now hear all the transmission / mechanical whines ;) 2 Link to comment Share on other sites More sharing options...
Popular Post SteveJ Posted April 27, 2020 Popular Post Share #65 Posted April 27, 2020 I broke out of quarantine today to go over to work on a gentleman's Z. He is in his 70s and is planning on selling it because he can no longer get in and out easily. The car isn't in bad shape, but it has suffered from benign neglect. The car is a nice specimen to work on, and it helps me maintain my proficiency while I mentally prepare to work on my 240Z. I replaced the fuel pump that was leaking. Thanks to the thread from @David Downs, I realized I need to prime the pump. Lacking a handy fuel can, I got some Sea Foam and primed the pump that way. Once it was primed, it worked a lot better. After adjusting the idle and carburetors, I found a leak on the front carb, coming from the hose between the float bowl and carburetor. I didn't have my replacement hose with me, so I will have to go back another day to fix that. The car also needs an oil change. I noticed fuel going from the pump into the engine when I pulled the bad pump. The level on the dipstick was high. I told the owner I would change the oil at his place so he doesn't have to drive the car like that. I hope to help the owner get a good selling price on the car. 5 Link to comment Share on other sites More sharing options...
gwri8 Posted April 27, 2020 Share #66 Posted April 27, 2020 I replaced a broken Helicoil on my #6 cylinder today, or should I say the last two and 1/2 days... . It started when I was checking my plugs when I noticed #6 came out with the helicoil attached. No big deal I thought, I'll just put some lock tight on it and put it back in, until I noticed was only half of the helicoil. Checked the head and sure enough the other half was still there. Aaarrgh! End result was that I successfully removed the stuck half without having to remove the head.? I did learn a couple of new things that hope I won't have to remember. 1 1 Link to comment Share on other sites More sharing options...
7tooZ Posted April 27, 2020 Share #67 Posted April 27, 2020 (edited) Joined 84 members of our local car club on “Celebrate” Cruise for one wedding and five birthdays plus a food bank donation .here is a short version. Checkout the “Bird” in front of me, it’s an original survivor and his second car is a GTR. Then look for the red 570 Ferrari at the end. Yesterday she was driving her other car. A Mclaren. to much fun for a charity driv IMG_0191.MOV IMG_0191.MOV Edited April 27, 2020 by 7tooZ Link to comment Share on other sites More sharing options...
moelk Posted May 1, 2020 Share #68 Posted May 1, 2020 Painted my wheels (rubber paint so it can be removed) anthracite grey. Nice with a new look for awhile till i can pull the trigger on some other wheels. Also changed my interior bulbs to leds. 2 Link to comment Share on other sites More sharing options...
Pop's Z Posted May 1, 2020 Share #69 Posted May 1, 2020 (edited) Took the renowned Mr. Brown out of winter storage. Started right up. Took it for a short drive to un-flatten the tires. Nice to have him back. Now I can practice safe social distancing in style. Cheers, Mike Edited May 1, 2020 by Pop's Z 1 Link to comment Share on other sites More sharing options...
Captain Obvious Posted May 2, 2020 Share #70 Posted May 2, 2020 10 hours ago, Pop's Z said: Took it for a short drive to un-flatten the tires. I did the exact same thing just the other day! We actually got two days in a row where it did NOT rain, and I took my Z out for a bit. On the good side, it started right up and ran exactly the same as it did when I put it away last fall. On the bad side, all of the unfinished winter projects are still un-finished. 1 Link to comment Share on other sites More sharing options...
AK260 Posted May 2, 2020 Share #71 Posted May 2, 2020 Painted my wheels (rubber paint so it can be removed) anthracite grey. Nice with a new look for awhile till i can pull the trigger on some other wheels. Also changed my interior bulbs to leds.Those wheels look great dude! Did you use a proper spray gun or rattle can?BTW 7 year old tyres! Are they still gripping OK in the wet? Mine were truly gone at that point even with 6.5mm left. And yes I had a VERY big scare one wet day. Link to comment Share on other sites More sharing options...
moelk Posted May 2, 2020 Share #72 Posted May 2, 2020 44 minutes ago, AK260 said: Those wheels look great dude! Did you use a proper spray gun or rattle can? BTW 7 year old tyres! Are they still gripping OK in the wet? Mine were truly gone at that point even with 6.5mm left. And yes I had a VERY big scare one wet day. Yeah, rattle can and heat gun. Worked out well. Tires are still very good, don’t get many miles per year and never in rain. But aiming for new wheels next season. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now