Popular Post lonetreesteve Posted February 26, 2020 Popular Post Share #1 Posted February 26, 2020 (edited) Klassic Fab has been manufacturing quality VW Bus floor replacements for years and has recently started manufacturing floor pans and frame rails, etc for 240Zs and for other vintage Japanese cars. Here's their website: https://kfvintagejdm.com/ Pictures courtesy of The 240z Guild. Edited February 26, 2020 by lonetreesteve 9 Link to comment Share on other sites More sharing options...
rturbo 930 Posted February 26, 2020 Share #2 Posted February 26, 2020 Inner rockers, and I see outer rockers too. Is there finally an alternative to the tabco rockers? Nice to see another replacement panel source come on the scene. 1 Link to comment Share on other sites More sharing options...
26th-Z Posted February 26, 2020 Share #3 Posted February 26, 2020 Nice looking pressings. I see the frame rails in your picture but they don't show up on the web site. I'll have to talk to them. Link to comment Share on other sites More sharing options...
lonetreesteve Posted February 26, 2020 Author Share #4 Posted February 26, 2020 10 minutes ago, 26th-Z said: Nice looking pressings. I see the frame rails in your picture but they don't show up on the web site. I'll have to talk to them. Yes, I checked out the website and didn't see the frame rails either. Looks like they can be contacted at 561-747-4800 or sales@klassicfab.com Link to comment Share on other sites More sharing options...
240Ziggy Posted February 26, 2020 Share #5 Posted February 26, 2020 Wow. Very nice! Should have had this five years ago. Now they need to make the proper rear valance. 2 Link to comment Share on other sites More sharing options...
lonetreesteve Posted February 27, 2020 Author Share #6 Posted February 27, 2020 3 hours ago, 240Ziggy said: Wow. Very nice! Should have had this five years ago. Now they need to make the proper rear valance. I agree. It would also be nice if KlassicFab made the rear inside hatch panel. I hear that Tabco's doesn't fit very well and doesn't look stock. 1 Link to comment Share on other sites More sharing options...
26th-Z Posted February 27, 2020 Share #7 Posted February 27, 2020 I have been looking for a lower cross-member / lower radiator, between the frame rails. Link to comment Share on other sites More sharing options...
lonetreesteve Posted February 28, 2020 Author Share #8 Posted February 28, 2020 Here's what the 240z Guild had to say about Klassic Fab's new floor pans, frame rails and rocker panels: "We received a set of Klassic Fabrications 240z complete floor, frame rails, and inner and outer rocker kits to take a look at, and all that can be said is, They Look Fabulous. It is about time there is a full kit that is shaped correctly for the trans tunnel, along with the front and back toe board uprights that are also normally bad if you are already in the position to needing floor replacement. The seat mount brackets are awesome, and the replacement frame rails appear to be direct copies for an easier replacement that doesn’t have that frame rail step down size reduction issue that screams aftermarket repair. For any of you that have been following The 240z Guild, you will already know that we have only been dealing in Original Floor Cars since we started, and those cars are few and far between, so these correct copy parts is the Game Changer for any future high point restoration project." Link to comment Share on other sites More sharing options...
S30Driver Posted February 28, 2020 Share #9 Posted February 28, 2020 Very nice indeed. Domestic USA Shipping is included in price as well. Link to comment Share on other sites More sharing options...
madkaw Posted February 28, 2020 Share #10 Posted February 28, 2020 6 hours ago, lonetreesteve said: Here's what the 240z Guild had to say about Klassic Fab's new floor pans, frame rails and rocker panels: "We received a set of Klassic Fabrications 240z complete floor, frame rails, and inner and outer rocker kits to take a look at, and all that can be said is, They Look Fabulous. It is about time there is a full kit that is shaped correctly for the trans tunnel, along with the front and back toe board uprights that are also normally bad if you are already in the position to needing floor replacement. The seat mount brackets are awesome, and the replacement frame rails appear to be direct copies for an easier replacement that doesn’t have that frame rail step down size reduction issue that screams aftermarket repair. For any of you that have been following The 240z Guild, you will already know that we have only been dealing in Original Floor Cars since we started, and those cars are few and far between, so these correct copy parts is the Game Changer for any future high point restoration project." I like the point about the tunnel shape . That is a big deal compared to what’s available now . Zed Findings floors are well made but don’t follow the tunnel shape correctly on the early Z . 3 Link to comment Share on other sites More sharing options...
zspert Posted March 3, 2020 Share #11 Posted March 3, 2020 Given his history, I just can't believe ANYTHING that character says! 3 Link to comment Share on other sites More sharing options...
lonetreesteve Posted March 3, 2020 Author Share #12 Posted March 3, 2020 13 hours ago, zspert said: Given his history, I just can't believe ANYTHING that character says! zspert, Please fill us in on the 240Z Guild - why don't you trust them? Link to comment Share on other sites More sharing options...
Parman
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now