Posted June 1, 20204 yr comment_600572 Thanks to anyone in advance, This afternoon finally greased and reassembled steering rack on series 1 car. I am discovering that the pinion gear catches (like a clunk) right in the centered position where the steering would be centered. It does it again when the gear turns a full revolution in either direction. I was able to source the pinion seal but had hoped the rest of it was in decent shape. How wrong I was. I have been reading older posts that give parts sources but most were 3 or 4 years ago. Can anyone direct me to a source that would have the pinion gear and bearing? I'm hoping to not have to replace the entire unit but I suppose the rack could be bad too. Thanks again . Link to comment https://www.classiczcars.com/forums/topic/64099-locating-rackpinion-parts-car19500/ Share on other sites More sharing options...
June 1, 20204 yr comment_600587 The parts should have visible wear near center. If the rack or pinion are worn, I would think you're out of luck. Although I have never searched for those part numbers Link to comment https://www.classiczcars.com/forums/topic/64099-locating-rackpinion-parts-car19500/#findComment-600587 Share on other sites More sharing options...
June 1, 20204 yr Author comment_600588 Thanks Patcon. . . I was able to find the pinion bearing and seal today and I'll have it soon. If new bearing doesn't at least improve the catch I'll be shopping around. Somebodies rebuilding and selling them so there might be a pinion gear out there somewhere. Maybe not. Link to comment https://www.classiczcars.com/forums/topic/64099-locating-rackpinion-parts-car19500/#findComment-600588 Share on other sites More sharing options...
June 1, 20204 yr comment_600598 Pinion gear and rack gear for 69-78 appear to both be NLA for both numbers Link to comment https://www.classiczcars.com/forums/topic/64099-locating-rackpinion-parts-car19500/#findComment-600598 Share on other sites More sharing options...
Create an account or sign in to comment