grannyknot Posted December 13, 2020 Share #109 Posted December 13, 2020 16 hours ago, 240ZBUILTBYME said: anybody know if the silver brackets from the steering rack bushes are meant to be there? They looked like diy aluminum shims made up. Those rubber steering rack mounts are the originals and once they get old the rack flops back and forth, a PO has made up those shims to try to get some of the slop out. The new poly mounts improve the steering feel. Link to comment Share on other sites More sharing options...
240ZBUILTBYME Posted December 14, 2020 Author Share #110 Posted December 14, 2020 21 minutes ago, grannyknot said: Those rubber steering rack mounts are the originals and once they get old the rack flops back and forth, a PO has made up those shims to try to get some of the slop out. The new poly mounts improve the steering feel. Yeah that’s what I figured! Cheers! Yeah poly bushes for sure upon rebuild. Ryan 1 Link to comment Share on other sites More sharing options...
240ZBUILTBYME Posted December 16, 2020 Author Share #111 Posted December 16, 2020 Early Xmas present arrived... out of the uk from auto panel solutions 1 Link to comment Share on other sites More sharing options...
tyroguru Posted December 16, 2020 Share #112 Posted December 16, 2020 Ryan - I'm being uber dense - these look like a rear lower valence (??) but, if so, why do you need two? I haven't worked on this area at all so probably don't understand at all how the sections are made up. Link to comment Share on other sites More sharing options...
240ZBUILTBYME Posted December 16, 2020 Author Share #113 Posted December 16, 2020 (edited) 8 hours ago, tyroguru said: Ryan - I'm being uber dense - these look like a rear lower valence (??) but, if so, why do you need two? I haven't worked on this area at all so probably don't understand at all how the sections are made up. Not dense at all Jon! I only need one, I shared the shipping costs with another guy to get it to Australia from the uk. 140£ (~200USD) to ship it!!!! By the time I finish the restoration I think I will have spent more in shipping than buying the car! Ryan Edited December 16, 2020 by 240ZBUILTBYME 2 Link to comment Share on other sites More sharing options...
240ZBUILTBYME Posted January 16, 2021 Author Share #114 Posted January 16, 2021 Happy new year everyone! May this year bring you much progress on your projects or many miles in your z. weatherstrip kit arrived along with rubber and grommet kit all from z car depot. I am 90% confident that the zcardepot kit is straight up the precision kit. All parts are corresponding to precision’s part numbers, arrived in a precision box, some parts did not come in precision branded packets but upon watching some of the precision installation videos on YouTube some of the packaging looks unbranded. Also came with a precision kit packing list. So unless z car depot goes through the trouble of restickering all their kit with precision part numbers. I’m pretty sure I have a precision kit. What I don’t get is the 200 USD price difference? Zcardepot 289 USD and from precision 468 USD! Rubber bumper and grommet kit was a bit of an impulse buy, but contains a lot of parts I assume I’ll need at some stage. My rationale in these purchases is that I will need door seals to start gapping panels and doors when I replace my outer rockers. Zcardepot had black Friday sales which meant the amount I saved covered the shipping I have to pay to get it to Perth. So I pulled the trigger. 2 Link to comment Share on other sites More sharing options...
240ZBUILTBYME Posted January 16, 2021 Author Share #115 Posted January 16, 2021 Had so much time off over the Xmas/new year break but due to Family commitments, new baby and spending two weeks in Western Australia’s beautiful southwest, progress on the car was non existent. I managed to strip my rear SU, so plan is now to buy a parts washer and clean everything in prep for replating and vapor blasting. Can’t believe how many individual parts make up a set of SUs! All parts very thoroughly catalogued and organized. Does anyone know the best place to source oem or equivalent fasteners for SUs? I have some screws with stripped heads etc I did receive my blemished zstory jdm muffler. Which is a very nice unit, and for 260$ aud including shipping I couldn’t resist. I don’t know what my plan is to minimize the blemish just yet. slight damage during shipping but nothing unfixable, may just need to have a machine shop shave the tip. im hoping I’m able to make some decent progress this year. Wish me luck Ryan 2 Link to comment Share on other sites More sharing options...
dutchzcarguy Posted January 17, 2021 Share #116 Posted January 17, 2021 (edited) 14 hours ago, 240ZBUILTBYME said: slight damage during shipping but nothing unfixable, Take a round piece of hard wood (piece of your broomstick) and give the pipe some little hits with it, from the inside of the pipe.. you will get that super smal dent out.. Just carfully with small hits. 😉 (or scuff it with the wood from inside to outside.. take your time. ) Edited January 17, 2021 by dutchzcarguy 1 Link to comment Share on other sites More sharing options...
Racer X Posted January 17, 2021 Share #117 Posted January 17, 2021 (edited) 18 hours ago, 240ZBUILTBYME said: Had so much time off over the Xmas/new year break but due to Family commitments, new baby and spending two weeks in Western Australia’s beautiful southwest, progress on the car was non existent. I managed to strip my rear SU, so plan is now to buy a parts washer and clean everything in prep for replating and vapor blasting. Can’t believe how many individual parts make up a set of SUs! All parts very thoroughly catalogued and organized. Does anyone know the best place to source oem or equivalent fasteners for SUs? I have some screws with stripped heads etc I did receive my blemished zstory jdm muffler. Which is a very nice unit, and for 260$ aud including shipping I couldn’t resist. I don’t know what my plan is to minimize the blemish just yet. slight damage during shipping but nothing unfixable, may just need to have a machine shop shave the tip. im hoping I’m able to make some decent progress this year. Wish me luck Ryan the SU carb guys in Oregon should be able to hook you up with SU carb hardware. Like Zed pointed out, a bit of wood on the inside (hardwood, like oak, or even better, ironwood), and use a hard plastic mallet on the outside to tap down on either side of the downward deformation should straighten it up. You will likely need to sand and polish the stainless after, to clean up any marring or scratches. It won’t even be noticeable. Edited January 17, 2021 by Racer X 1 Link to comment Share on other sites More sharing options...
240ZBUILTBYME Posted February 6, 2021 Author Share #118 Posted February 6, 2021 Thanks @dutchzcarguy! On 1/18/2021 at 1:39 AM, Racer X said: the SU carb guys in Oregon should be able to hook you up with SU carb hardware. Like Zed pointed out, a bit of wood on the inside (hardwood, like oak, or even better, ironwood), and use a hard plastic mallet on the outside to tap down on either side of the downward deformation should straighten it up. You will likely need to sand and polish the stainless after, to clean up any marring or scratches. Thanks X I have packed the muffler away for now but I will give this ago when the time comes, thanks for the advice. Do you mean z therapy? I just bought a diy rebuild kit from them and asked if they could supply fixings they said no.... 😢 ryan Link to comment Share on other sites More sharing options...
240ZBUILTBYME Posted February 6, 2021 Author Share #119 Posted February 6, 2021 Unfortunately I have not had time to work on the car since New Years . My mum is unwell and I have had to spend a lot of time with her. Managed to put this together. Another massive thanks to @ConVerTT for creating and sharing this jig. I’ve never done metal work before this and if this inspires even one person to give it a go I’ve accomplished something! Ryan 2 Link to comment Share on other sites More sharing options...
240ZBUILTBYME Posted February 17, 2021 Author Share #120 Posted February 17, 2021 More pieces of the jigsaw puzzle arrived today. Took MSA aka the z store 6 months to get these to me. Worst customer service I’ve ever experienced. I discourage anyone thinking of purchasing from them unless completely necessary. hopefully KF vintage jdm starts making these soon, the tabco pieces are very rough. But they will get the job done. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now