Alternative to Ground Control ?

[SN8BYTE]

Hey guys;

I’m getting ready to upgrade my suspension on my ITS 240z project. I’ve already installed Urethane bushings & heavy sway bar; and have Tokico 5-way adjustables on the shelf (not installed yet).

I now need the coilovers and camber plates. The only manufacture I’m aware of is Ground Control. Does anyone know of alternative manufactures for racing suspension components?

Thanks in advance for your help and advice.

[kmack]

Is Carrera still around? We used a set of coil overs on a research project vehicle about 8 years ago. Those were very nice!

[ScaryFast]

www.arizonazcar.com

a bit expensive, but nice stuff

[2ManyZs]

Here's another option...

http://www.zcarperformance.com/

There are a few others and I believe if you look around on the IT site you might find more...

http://www.improvedtouring.com/

You won't want to sell the car after you drive it with a decent coil-over set-up... you aren't going to believe the difference...:devious:

[phi22b@ck]

If you dont mind putting in a bit of work, you can get the tubes, collars etc from coleman racing products. You will have to get the sleeves machined to fit the strut tube, then you will need to get a perch to weld on.

I found that to be the most cost effective way to get a decent coil over set up. Then you just need to pick your springs...

Did you cut your struts down or did you use the proper length? You may want to cut them down...

[Zed]

There is also Modern Motorsports.

And there is always Motorsport Auto (MSA)

[SN8BYTE]

Thanks to everyone for the help... I'm always open for more info but this has given me alot to research.