On my path of recovery from my ill fitting RHD header, I need to find a new L24 block crankcase breather tune as I had to cut mine down. I'm also after a series 1 heat shield and if possible a valve cover vent tube.  

Apologies in advance for not posting this in the parts wanted section but those areas dont appear to see much traffic. 

Thanks in advance, cheers. 

Edited October 28, 20204 yr by ollie

Valve cover hose: https://jdm-car-parts.com/collections/hoses-pipes-valves-nissan-datsun-fairlady-240z-260z-280z-280zx/products/braided-pvc-valve-cover-hose-for-datsun-240z?variant=750597969

PCV hose: https://jdm-car-parts.com/collections/hoses-pipes-valves-nissan-datsun-fairlady-240z-260z-280z-280zx/products/pcv-braided-hose-for-datsun-240z?variant=745241697

Thanks...i'm after the crankcase breather metal tube and the 90 degree tube that screws into the valve cover.  

Valve cover breather: http://datnissparts.com/valve-cover-rocker-cover-l-shaped-vent-fitting-elbow-datsun-l16-l18-l20b-l24-l26-l28-also-naps-z-z20-z22-with-the-aluminum-cover-13267-23000/

Fantastic, thanks Steve!!!!

Crankcase connector pipe, part number 11830-E3000, http://www.jp-carparts.com/nissan/partlist.php?maker=nissan&type=86&cartype=11&fig=C1401&page=3

6 hours ago, SteveJ said:

Crankcase connector pipe, part number 11830-E3000, http://www.jp-carparts.com/nissan/partlist.php?maker=nissan&type=86&cartype=11&fig=C1401&page=3

Steve, I think you mean this link. https://www.carpartsmanual.com/datsun/Z-1969-1978/engine-240z-260z/emission-control-device #4 The part number is correct 11830-E3000 (discontinued.)

Yours went to a s12 Silvia. (?)

No offense intended.

 

I didn't noticed that the site I referenced didn't have the two parts of the part number combined.

Chances are that you could use some BSP threaded pipe for the crankcase. I'm not sure what size, though.

That stock pipe is tapered and is effectively a press fit.  The search goes on...thanks a ton, guys.  

If the other leads don’t pan out I have some block breather tubes, valve cover breather elbows, and maybe a S1 heat shield. All used, but all restorable. PM me.

Edited October 29, 20204 yr by zKars

Thanks to @SteveJ and @zKars all items are inbound, thanks very much, guys!