kats Posted September 11, 2022 Share #1705 Posted September 11, 2022 19 hours ago, CanTechZ said: My car is a 7/70. #6521 and has a slightly different emissions decal. It also references the 1971 regulations. The interesting thing is that my car is a non-emissions model for the Canadian market and came without the emissions devices mentioned on the decal. Here is a picture from before I removed if during my current resto. Here's a link to a discussion on this subject. Might be a good place to continue this discussion. Thanks! Your car is always being a good reference for those maniac topics 😊 The point is , your car doesn’t have the emissions devices nor 1971 model , but your car has the decal which referred ‘71’ and ‘AIR PUMP’ . I have reviewed pictures in my laptop, I found two cars which are dated 5/70 car has already ’71 model’ and ‘ AIR PUMP’ decal just like yours . Both cars are US emissions devices vehicles and one of them is the BAT green 310000 $ car . I am confused now . And I need to amend my words , I can’t say the decal is usable to determine 70 or 71 model .Only thing I am sure it is useable for proving manual transmission or automatic transmission. Please see this picture, 08/71 automatic transmission US 240Z has this decal . It says ‘ California’ and ‘ 1971 model year ‘ . In this case, August is for 1971 model . Why does May 1970 car has 1971 model decal ? Kats Link to comment Share on other sites More sharing options...
kats Posted September 11, 2022 Share #1706 Posted September 11, 2022 This is the decal of the BAT green 240Z . CanTechZ , I want to know about your 240Z’s fuel tank . Your car doesn’t have a reservoir tank behind the right rear quarter panel , does she ? Also your car doesn’t have breather / return pipes on the main fuel tank ? Kats Link to comment Share on other sites More sharing options...
Zpenman Posted September 11, 2022 Share #1707 Posted September 11, 2022 To avoid all of the drama, just leave off the model year in your advertisement when selling and include the mfg date (i.e., 7/71) as shown on the data plate. 1 Link to comment Share on other sites More sharing options...
jfa.series1 Posted September 11, 2022 Share #1708 Posted September 11, 2022 3 hours ago, Carl Beck said: From the VIN’s I have collected, I have 12/70 starting at HLS30- 15361 and running though #18048. 01/71 starting at 18144 and ending at 20533, It would appear that the Metal Data Tags (Door, Engine and Dash) were produced first on an Addressograph type machine - where serial numbers were stamped sequentially, like the 17770, followed by 17771, 17772 etc.. Then the date the car was finished at the top was hand stamped with a metal number Punch Die (aka Metal Numbered Die) Addressograph/Graphotype Machine https://www.youtube.com/watch?v=85f-H6Bc9BQ Carl, Here is an update for your list of the 12/70 cars. Regards, Jim 1 Link to comment Share on other sites More sharing options...
Zed Head Posted September 11, 2022 Author Share #1709 Posted September 11, 2022 1 hour ago, Zpenman said: To avoid all of the drama, just leave off the model year in your advertisement when selling and include the mfg date (i.e., 7/71) as shown on the data plate. The purpose isn't drama it's more about an understanding of what Nissan would consider a 1970 model versus a 1971 model. Way back then decisions were made about changes that they would make to the 1970 design, for the 1971 model year. Typically, flaws are removed for the new models, for example. Or, in the 70's, new emissions regulations had to be met, based on model year designation, as kats has shown above. You could also talk about "purity". A mid-1970 produced 1970 model might be more "pure" than a late year production. Maybe Nissan started introducing 1971 features before they had to. When was the last "pure" 1970 produced? Here's another feature I found in the Owner Manual. It might not even actually be a thing, I don't know. The shape of the keys. And the sun visor. 1 Link to comment Share on other sites More sharing options...
Racer X Posted September 11, 2022 Share #1710 Posted September 11, 2022 20 hours ago, Johnz1971 said: Somebody sloppily pounded a "1" on my 2/70 z too! I like to refer to mine as a "1969 3/2" model year. 😉 You have a good hand for VIN poker. Three of a kind, lucky seven. Link to comment Share on other sites More sharing options...
Racer X Posted September 11, 2022 Share #1711 Posted September 11, 2022 10 hours ago, dutchzcarguy said: (My translator does not give a name for "slagletters/cijfers" so i like to know what you call these tools to hit with the hammer to make the letter/number on those plates! Thanks!) They are called hand stamps (or punches). They come in sets, numbers, letters, symbols, and in various fonts and sizes. 1 1 Link to comment Share on other sites More sharing options...
Racer X Posted September 11, 2022 Share #1712 Posted September 11, 2022 2 hours ago, Zpenman said: To avoid all of the drama, just leave off the model year in your advertisement when selling and include the mfg date (i.e., 7/71) as shown on the data plate. Cars are bought, sold, registered and licensed based on their model year, not the date of manufacture. 1 Link to comment Share on other sites More sharing options...
Carl Beck Posted September 11, 2022 Share #1713 Posted September 11, 2022 2 hours ago, jfa.series1 said: Carl, Here is an update for your list of the 12/70 cars. Regards, Jim Hi Jim - My BAD... I must have got lost going back and forth on the spreedsheet - of course I have the Original Owner of #15320 listed as 12/70 - matter of fact checking more carefully - I have HLS30 15316 from BAT also as 12/70 DOM. (8 Sept. 2022). 1 Link to comment Share on other sites More sharing options...
Carl Beck Posted September 11, 2022 Share #1714 Posted September 11, 2022 3 hours ago, Zed Head said: The purpose isn't drama it's more about an understanding of what Nissan would consider a 1970 model versus a 1971 model. Way back then decisions were made about changes that they would make to the 1970 design, for the 1971 model year. Typically, flaws are removed for the new models, for example. Or, in the 70's, new emissions regulations had to be met, based on model year designation, as kats has shown above. You could also talk about "purity". A mid-1970 produced 1970 model might be more "pure" than a late year production. Maybe Nissan started introducing 1971 features before they had to. When was the last "pure" 1970 produced? Here's another feature I found in the Owner Manual. It might not even actually be a thing, I don't know. The shape of the keys. And the sun visor. Here is the list of 18 features that were all introduced on the "Late 1971 Model", beginning with VIN's HLS30 21001 and HS30 00501. The US Safety and Emissions standards had to be implemented on cars manufactured on or after the date (Month & Year) specified by law. http://zhome.com/History/New71LateP2.htm 1 Link to comment Share on other sites More sharing options...
Carl Beck Posted September 11, 2022 Share #1715 Posted September 11, 2022 5 hours ago, Zed Head said: The purpose isn't drama it's more about an understanding of what Nissan would consider a 1970 model versus a 1971 model. Way back then decisions were made about changes that they would make to the 1970 design, for the 1971 model year. Typically, flaws are removed for the new models, for example. Or, in the 70's, new emissions regulations had to be met, based on model year designation, as kats has shown above. You could also talk about "purity". A mid-1970 produced 1970 model might be more "pure" than a late year production. Maybe Nissan started introducing 1971 features before they had to. When was the last "pure" 1970 produced? While Nissan released all 1971 features at once on the “Late 1971 Model”; If you think about it - releasing a different model while retaining the same “Model Year” for 1971 isn’t the only time Nissan did that. For 1974 Nissan offered two different models of the 260Z here in the US. The original design 260Z based on the 240Z body and then later the 260Z based on the coming 1975 280Z body. We are told that the Fuel Injected L28E was delayed in development and/or in US Emissions Certification, while the new design body proceeded on schedule into production. The result was Nissan continuing to sell the L26 in the new body to meed emissions standards as a 1974 260Z So the 1975 280Z didn’t come on the market until after Jan. 1975. 1 Link to comment Share on other sites More sharing options...
Zed Head Posted September 12, 2022 Author Share #1716 Posted September 12, 2022 48 minutes ago, Carl Beck said: While Nissan released all 1971 features at once on the “Late 1971 Model”; If you think about it - releasing a different model while retaining the same “Model Year” for 1971 isn’t the only time Nissan did that. There's probably a Service Bulleting for 1974 changes too, I'd assume. You've kind of skewed my point. It's not about introducing a new model mid-year. It's about what defines the model. The basic point is, as you've shown, is that Nissan has defined a "1971" as having certain features. Different from a 1970 model. They listed all of them and defined them as "late 1971". By Nissan's own words the guy on BAT could argue that his car is actually a 1970 "model". Nissan seems to be saying that they didn't change anything until late 1971. There is no "early" 1971 240Z. Only 1970 240Z models made in early 1971. I saw your comments on zhome about when Nissan switched but it's not clear how you know that. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now