View Advert

Polished 3 screw cab and E46 manifold

---

Polished 3 screw carborator and an E46 intake manifold. These carbs just came off a 240. The owner of that car switched to a set of side draft Webers. These are ready to install, they are clean, all choke and slides work,and the tops have been polished.   There is no linkage and no springs. There is a 260 ERG manifold. Location of parts is Hillsboro, Oregon.

Also have a set of 4 screw carborator, E46 intake, heat shield. No linkage or springs included. One 3 screw carb is included in the price. These have been on the shelf for about 2 years. I would rebuild them just because of this E10 gas stuation and what that fuel does to gaskets. but, they may not need it, it's just what I would do.   Price on these carbs is $250.00. FOB Hillsboro Oregon. I have pictures if needed.

Contact me on this site or through my personal Email listed below.

---

• Advertiser
  Ed Brock
• Date
  01/03/2021
• Price
  $250.00
• Category
  Parts for Sale

 

Good evening , 

 

I am interested in these carbs , Im converting a very problematic EFI on my 1979 280zx . The previous owner swaped out the motor and its a mess electronically . I was wondering if these are still available and would it be possible to get the linkage ? 

May be interested in your 4 screw carbs if they are still available.

So how much per set, A bit confused.

Edited October 22, 20213 yr by tzagi1