Help: Male Bullet To Bullet Conector

[Yarb]

Swapping out the automatic to manual transmission. The reverse switch has two male bullets. The automatic wiring harness has the same male connections. Looking for a female to female sleeve to avoid cutting and replacing one side or the other. Looking for some insight here. Thanks... John 

 

[heyitsrama]

Order some fittings from http://vintageconnections.com and make it. 

[Yarb]

Looks like it has to be fabricated. Thought someone would offer a sleeve to mate two male bullets.

Edited January 12, 2021 by Yarb
Added info

[Yarb]

I realize it’s not the best solution for electrical connections but would suffice in this application on a reverse switch.

[heyitsrama]

Yeah it would be fine to do, I have some on my reverse switch as well, I made it myself as I had some wire and some left over connectors from another project.

I like the connectors on vintage connections because they look similar to OEM, I’m not sure if the modern (blue,yellow, red) plastic ones would fit, they certainly don’t look pretty.

Edited January 12, 2021 by heyitsrama

[240260280]

This can join them... some pliers and patience may allow you to bend a north american sta-kon connector to do the tick.

 

 

 

 

 

North America Types:

 

http://knowhow.napaonline.com/wiring-terminal-connector-guide/

 

 

Edited January 12, 2021 by 240260280

[grannyknot]

New female/female bullet connectors are one of those difficult things to find,  Vintage Connections is a great source but you could also try,  http://www.easternbeaver.com/Main/Elec__Products/Connectors/connectors.html

He has some great old style connectors and is a good seller to deal with.

Although not Nissan looking these are still retro looking,  scroll halfway down the page. http://www.easternbeaver.com/Main/Elec__Products/Connectors/Bullet_Connectors/bullet_connectors.html

Menage a trois?

Edited January 12, 2021 by grannyknot

[240260280]

Maybe drilling a piece of brass to the right diameter may work nicely.

[Yarb]

Good idea!