Been going through my engine for the last couple of months. I'm re installing it in the car and can't for the life of me remember if anything came out of this hole.   If so, would someone kindly re educate me.  It's roughly in the 11 o'clock position when facing the oil filter housing area.  Pictures on google show it not used but I could only find clear pictures of peoples engines on stands(not in car).  It's a 1982 F54.

 

Oil pressure sender?  See comments below.

 

 

Edited March 7, 20214 yr by heyitsrama

That's a zx thing I guess. My '77 has nothing at 11 but as heyitsrama said the oil sender is at 2 oclock.

It's not the oil pressure sender, that is in the 3 o'clock position when facing the oil filter. this hole is above and to the left a bit when facing the oil filter.

I searched the turbo forums and found that a knock sensor goes there?  I think that I read that the turbo blocks and N/A blocks are the same except for the turbos had an oil cooler and dish top pistons?  I don't remember pulling anything out of there but the block was at a machine shop for hot tanking and honing.  Maybe it's on his shop floor.

Edited March 7, 20214 yr by Reptoid Overlords

You beat me to it! Yeah, knock sensor.

https://www.zcar.com/threads/what-is-the-hole-just-to-the-left-of-the-oil-filter-on-f54-block.337993/