Hatch Emblems

[Wally]

Need a big favor. My hatch has had the holes for both hatch emblems filled in. Not sure why. Before i start painting it i need to know where the holes should be. Does anyone have a diagram with measurements or can someone take a photo of theres with measurements from right side of hatch and bottom of hatch so i will have a good est. of where to put holes? much appreciated. if  matters is 1971 240z series 2

last what are small recessed things that hold in emblems. some kinda clips

 

Edited March 30, 2021 by Wally

[bpilati]

So they were welded closed?

[Wally]

not sure, possibly. i went and looked at the hatch a minute ago (its all at my painters). even looking from the inside i cant see or feel where the holes were originally. So, i will most likely need to re-drill them.

 

[bpilati]

Have the painter sand the area. If it's just filler, drilling is unnecessary. 

[Ed Brock]

3 hours ago, Wally said:

Need a big favor. My hatch has had the holes for both hatch emblems filled in. Not sure why. Before i start painting it i need to know where the holes should be. Does anyone have a diagram with measurements or can someone take a photo of theres with measurements from right side of hatch and bottom of hatch so i will have a good est. of where to put holes? much appreciated. if  matters is 1971 240z series 2

 

 

 

Video Player is loading.

Play Video

Play

Unmute

 

Current Time 0:05

/

Duration 0:19

Loaded: 100.00%

 

 

 

Stream Type LIVE

Seek to live, currently playing liveLIVE

Remaining Time -0:14

 

Playback Rate

1x

Chapters

• Chapters

Descriptions

• descriptions off, selected

Captions

• captions settings, opens captions settings dialog
• captions off, selected

Audio Track

Fullscreen

This is a modal window.

 

Beginning of dialog window. Escape will cancel and close the window.

Text

ColorWhite Black Red Green Blue Yellow Magenta CyanTransparencyOpaque Semi-Transparent

Background

ColorBlack White Red Green Blue Yellow Magenta CyanTransparencyOpaque Semi-Transparent Transparent

Window

ColorBlack White Red Green Blue Yellow Magenta CyanTransparencyTransparent Semi-Transparent Opaque

Font Size

50% 75% 100% 125% 150% 175% 200% 300% 400%

Text Edge Style

None Raised Depressed Uniform Dropshadow

Font Family

Proportional Sans-Serif Monospace Sans-Serif Proportional Serif Monospace Serif Casual Script Small Caps

Reset restore all settings to the default valuesDone

Close Modal Dialog

End of dialog window.

 

 

Advertisement: 0:21

 

 

 

 

 

 

last what are small recessed things that hold in emblems. some kinda clips

 

Wally,

We have a '71 series 2 car coming in. It is also missing the hatch emblems. I can take pictures and messurements for you when it arrives. Will this car give you what you need? Is series 1 and series 2 different?

Ed

[S30Driver]

4 hours ago, Wally said:

last what are small recessed things that hold in emblems. some kinda clips

 

Here are the oem clips that hold the emblems on car.

https://zcardepot.com/products/emblem-clip-set-clips-keepers-10-oem-240z-260z-280z

[siteunseen]

4 hours ago, Wally said:

Need a big favor. My hatch has had the holes for both hatch emblems filled in. Not sure why. Before i start painting it i need to know where the holes should be. Does anyone have a diagram with measurements or can someone take a photo of theres with measurements from right side of hatch and bottom of hatch so i will have a good est. of where to put holes? much appreciated. if  matters is 1971 240z series 2

last what are small recessed things that hold in emblems. some kinda clips

 

It may have had a spoiler sometime in it's life. Mine does and the holes are filled in, emblems are mounted on the spoiler. 

[CanTechZ]

I'm pretty sure they are the same for series 1 and 2, here are measurements from my 1970. The datum for measurement is the lower right corner of hatch. The bottom edge of the hatch is curved so instead of the that edge I drew a line at right angle to the right edge for the vertical dimensions. I hope that makes sense.

[Wally]

you guys are awesome. exactly what i was needing. thanks

 

[Ed Brock]

CanTechZ,

Nice job. Great grid. Thanks for doing that, now I don't have to.

Ed

[Racer X]

3 hours ago, CanTechZ said:

I'm pretty sure they are the same for series 1 and 2, here are measurements from my 1970. The datum for measurement is the lower right corner of hatch. The bottom edge of the hatch is curved so instead of the that edge I drew a line at right angle to the right edge for the vertical dimensions. I hope that makes sense.

Awesome idea!

 

 

2 hours ago, Wally said:

you guys are awesome. exactly what i was needing. thanks

 

Maybe @CanTechZ could mail you a copy of his template.

 

[CanTechZ]

Here is a scan of my sketch, if you print on 8.5" x 11" paper and select "actual size" it will print to scale.

 

1970 240Z HATCH EMBLEM HOLES.pdf