260Z Firing order

[Shawninvancouver]

electronic ignition...  NO mark on cap..  wires were all backwards with 1 at fire wall...   no clue why

what do i do here???

[siteunseen]

Shouldn't you have a rotor button?

#1 mark on the cap

Rotor button

Edited June 5, 2021 by siteunseen

[Zed Head]

1 hour ago, Shawninvancouver said:

what do i do here???

Leave the wires on the spark plugs.  Disconnect all of the wires from the distributor cap.  Reconnect the wires to the cap as shown in w3wilkes post #2.

Put the rotor back on and make sure it points to #1 when the ignition timing mark is between zero and 10 degrees.

[Shawninvancouver]

there is NO mark on the cap... how do i find the first spot with a mark on the cap??

can  you not tell me by looking at the top of the cap??

[Zed Head]

33 minutes ago, Zed Head said:

Put the rotor back on and make sure it points to #1 when the ignition timing mark is between zero and 10 degrees.

Where the rotor points is #1.

[Shawninvancouver]

where is #1 ???

[Zed Head]

This is a rotor.

[Zed Head]

1 minute ago, Zed Head said:

Where the rotor points is #1.

 

[Zed Head]

The rotor goes here.  It presses on by hand.

[Shawninvancouver]

ok -  how do i set timing mark to zero?

[Zed Head]

[AZDatsun]

Maybe someone put your motor in the car backwards it happens all the time… 😆